Tools and accessories for tailors & upholsterers |
 |
Presses and tools (for press, cuts off etc.), buttons and knobs, eyelets |
|
 |
Pneumatical press NeaReach NR-003 (3 heads)
| Pneumatic press for pressing, closing rivets, wolves, patents or punching holes with carousel rotary head for 3 separate tools. Cutting holes, closing rivets, press studs or wolves is very simple with this press. The press can be attached to any suitable work table. The press must be connected to a compressed air supply and an AC 230V electrical supply. | | Tech. specification: Type: NR-003 |
Manufacturer: NewReach | |
Number of heads: 3 |
Speed: 32 presses / min |
Supply voltage: AC 230V, 50Hz |
Power consumption: max. 20W |
Working pressure: adjustable 0.15 - 0.8 MPa |
Max. pressure: 0.8 MPa (8 Bar or 7,895 Atm) | |
Max. working height (without tools): 98 mm |
Max. working extension (from the center of the hole): 59 mm |
Lower bolt mounting hole (piston): 11.65 mm |
Mounting hole for upper shutter (piston): 10 mm | |
Dimensions (l x h x w): 300 x 360 x 280 mm |
Weight: 24 Kg | | | Detail: By turning the head, which can hold up to 3 tools at the same time, you can easily change the desired function of the press. For example, you can use a tool for punching, closing presses and patents. | | Tools for punching or closing are not part of this product. We can make tools according to your wishes. | |
The press is equipped with a protective frame that protects the operator from hand injuries. In this version without a table. | |
Equipment and description: |
rotary carousel head for 3 tools |
speed up to 45 strokes / min (according to the manufacturer), our measured speed up to 32 strokes / min |
working pressure 0.1 0.8 MPa |
supply voltage AC 230V, 50Hz |
laser pointer |
robust design | |
Pneumatic multi-head presses for pressing presses can be used for all types of textiles (eg knitwear, jackets, denim), footwear, hats, plastic materials, canvases, leather, etc.
With multi-head types of presses, it is possible to use more sets of heads and dies, which can be easily changed, it is also possible to use more dimensions of presses. Thanks to the possibility of adjusting the pressure valve, it is possible to apply various special presses and materials with different thicknesses. The presses are pressed firmly and without any damage to the surface. It therefore also meets the demanding requirements of customers. Pneumatic presses are designed to close presses and patents in the clothing or leather industry. Aiming is performed using an integrated laser pointer.
|
|
| Other types: | | NeaReach NR-003 (3 heads) with table | | Eur 1264.8,- |
|
Eur 1082.6,- |
|
Universal press PL 25
| Hand uni press with new thickness construction. | | Tech. specification: Stroke: 25 mm |
Altitude: 230 mm (handle down), 550 mm (handle up) |
Working setout: 57 mm |
Working altitude: (adjustable) from 15 to 125 mm |
Upper tools: screw M6 with longitude to 15 mm |
Lower tools in: peg till 12 mm |
Peg (top): d 12 mm |
Thread in peg (top): M6 (longitude 15 mm) |
Lower pit: 12 mm |
Handle ( d 12 mm) with plastic grip |
Weight: 6.5 Kg |
More at picture detail! |
Material: iron casting, steel |
| | Detail: Using: shut kind, shut firmer opening quoits, shut saddlery rivet, shut ready-made mounting, clicking opening, die-cut matters on covering button. |
|
Eur 139.8,- net of VAT |
|
Universal press PL 45
| Hand uni press with new thickness construction. | | Tech. specification: Stroke: 45 mm (46 mm) |
Altitude: max. 325 mm (handle down), 535 mm (handle up) |
Working setout: 58 mm |
Working altitude: (adjustable) from 0 to 45 mm |
Upper tools: screw M6 with longitude to 30 mm |
Lower tools in: peg till 12 mm |
Peg (top): d 16 mm |
Thread in peg (top): M6 (longitude 30 mm) |
Lower pit: 12 mm |
Handle ( d 12 mm) with circural plastic grip |
Weight: 6.65 Kg |
More at picture detail! |
Material: iron casting, steel |
| | Detail: Using: covering button matters, shut kind, shut firmer opening quoits, shut saddlery rivet, shut ready-made mounting, clicking opening, die-cut matters on covering button. |
|
Eur 194.5,- net of VAT |
|
Hand held stamping tool and cut off tool for ring pressing (complete) - custom made
| High quality hand held pressing tool for closing steel or brass ringlets. Cut-off tool is included in price. | | Tech. specification: The closer is made from high quality materials - makes tool-life longer. |
Equipped with wide foot which prevents hand injury during pressing the ringlets.
| | Detail: It is necessary about 20 30 pieces of ringlets to test custom maded tools. Price according to sizes and type of pressed ringlets. |
|
to Eur 84.7,- net of VAT |
|
Lockup tools for quoits, eyelets (custom made)
| Stamping tools for eyelets for stamping by pneumatic, hand and electric press. | | Tech. specification: We produce pressing tool on your demand. | | Detail: Produce all sizes tool on shut, stamping quoits, ok, steel and brass, ornamental eyelets. Tool execution from very first-rate material. Tool execution according to of your requirements. Price in a couple of (lower and upper part). |
|
from 38.1,- net of VAT |
|
Die-cut circural head with sizes 4 - 60 mm
| It is instrumental towards cutting of textile for covering of buttons - we adapt all types of presses for all kinds of buttons and ringlets | | Tech. specification: In case of order please bring in: |
average of cut, blank (how big circle you need to be cut, eventually size of button) |
for which press will be used (way of gripping) | | | Detail: We will produce the cut according to your wish. To every size of lug or of button conforms different size of the cutter. It is necessary to specificate the size of cutter. |
|
Eur 21,- net of VAT |
|
Closer for knobs with sizes 18 - 44, 50 - 60
| It is instrumental towards closing during coating decorative buttons - we adapt for all types of marketed presses, for all types of buttons which we offer. Also we produce for different types. | | Tech. specification: We will produce the closer according to your wish. |
In case of order please bring in: |
type of button (what kind of buttons is needed to be closed eventually size of button) |
In case of arrangement for buttons which we do not offer send to us about 20 - 30 pieces of them for testing.
execution according to your accurate requirements. | | Detail: Always specificate for which size of button will be the closer used. |
|
| Sizes: | | knobs closer for size from 18 to 40 | | Eur 32,- | | knobs closer size from 50 to 66 | | Eur 36.4,- |
|
from Eur 30.9,- net of VAT |
|
Tools for stamping kind and patent
| Tools for stamping kind and patent destined for stamping by pneumatic, hand and electric press | | Tech. specification: We produce pressing tool on your demand. | | Detail: Produce all sizes tool on stamping kind and patent. Stamping in one’s operation. Tool execution from very first-rate material. Tool execution according to of your requirements. Price in a couple of (lower and upper part). |
|
from Eur 33.9,- net of VAT |
|
Tools for stamping kind and patent
| Tools for stamping kind and patent destined for stamping by pneumatic, hand and electric press | | Tech. specification: We produce pressing tool on your demand. | | Detail: Produce all sizes tool on stamping kind and patent. Stamping in one’s operation. Tool execution from very first-rate material. Tool execution according to of your requirements. Price in a couple of (lower and upper part). |
|
from Eur 33.9,- net of VAT |
|
Antique old-brass non-roll eyelets d4 / D8
| Small dia first-rate antique-brass quoits or eyelet for compressive pressing or fastening. Quoits are edgeless toll. Awards for 1000 piece. | | Tech. specification: Inside calibre 4 mm | | Detail: Fashion standard antique eyelets. We can supply tools and machinery to suit our entire range of curtain eyelets, usually from stock. We stock a wide range of eyelet inserting machinery, from
automatic and semi automatic, pneumatic machinery through
to hand closing tools. Our staff will be happy to advise on
applications and suitability. |
|
Eur 40.3,- net of VAT |
|
Antique old-brass non-roll eyelets d5 / D9
| Standard dia first-rate antique-brass quoits or eyelet for compressive pressing or fastening. Quoits are edgeless toll. Awards for 1000 piece. | | Tech. specification: Inside calibre 5 mm | | Detail: Fashion standard antique eyelets. We can supply tools and machinery to suit our entire range of curtain eyelets, usually from stock. We stock a wide range of eyelet inserting machinery, from
automatic and semi automatic, pneumatic machinery through
to hand closing tools. Our staff will be happy to advise on
applications and suitability. |
|
Eur 41.8,- net of VAT |
|
Antique old-brass non-roll eyelets d6 / D12
| Normal dia first-rate antique-brass quoits or eyelet for compressive pressing or fastening. Quoits are edgeless toll. Awards for 1000 piece.
| | Tech. specification: Inside calibre 6 mm | | Detail: Fashion standard antique eyelets. We can supply tools and machinery to suit our entire range of curtain eyelets, usually from stock. We stock a wide range of eyelet inserting machinery, from
automatic and semi automatic, pneumatic machinery through
to hand closing tools. Our staff will be happy to advise on
applications and suitability. |
|
Eur 47,- net of VAT |
|
Antique old-brass non-roll eyelets d8 / D14
| First-rate antique-brass quoits or eyelet for compressive pressing or fastening. Quoits are edgeless toll. Awards for 1000 piece.
| | Tech. specification: Inside calibre 8 mm | | Detail: Fashion standard antique eyelets. We can supply tools and machinery to suit our entire range of curtain eyelets, usually from stock. We stock a wide range of eyelet inserting machinery, from
automatic and semi automatic, pneumatic machinery through
to hand closing tools. Our staff will be happy to advise on
applications and suitability. |
|
Eur 54.2,- net of VAT |
|
Antique old-brass non-roll eyelets d10 / D20
| Big dia first-rate antique-brass quoits or eyelet for compressive pressing or fastening. Quoits are edgeless toll. Awards for 1000 piece.
| | Tech. specification: Inside calibre 10 mm | | Detail: Fashion standard antique eyelets. We can supply tools and machinery to suit our entire range of curtain eyelets, usually from stock. We stock a wide range of eyelet inserting machinery, from
automatic and semi automatic, pneumatic machinery through
to hand closing tools. Our staff will be happy to advise on
applications and suitability. |
|
Eur 118.2,- net of VAT |
|
Other eyelets and quoits on demand
| On reservation we are competently add and other sorts quoits | | Tech. specification: On invitational delivery all type quoits! | | Detail: e.g . quoits KOH-I-NOOR brass, steel, zinc-coated, in all size, scroll or normal. |
|
on demand |
|
Decorative buttons NORMAL (alu - plastic, 1000 pc., white) size from 18 to 60
| Buttons bodies (white botom part) with fixed eyelet is fit for make upholstery. decorative knobs. You can coate this knob with many types of materials. For example, You can use this knobs as decorative knobs for suits, blouses, handbags. Price for package 1000 pcs (1000 pcs bottom part and 1000 pcs upper part). | | Tech. specification: Type: knob NORNMAL with fixed eyelet |
Bottom part: plastic / white color |
Upper (cap) part: aluminum |
Upper part size: according to the selected size |
Sizes: 18 - avg. 11 mm, 20 - avg. 12 mm, 22 - avg. 14 mm, 24 - avg. 15 mm, 28 - avg. 18 mm, 30 - avg. 19 mm, 32 - avg. 20 mm, 36 - avg. 22 mm, 40 - avg. 26 mm, 44 - avg. 28 mm, 50 - avg. 32 mm, 60 - avg. 38 mm | | | Detail: Bottom knob element with fixed eyelet and alluminum upper part is fit for make decorative knobs or buttons. You can know it from suit, blouse, handbag. For aplication we recommended our Closer for knobs, our mechanical press and Churning rod (pestle). It is easy way for producing own decorative knobs. |
|
| Sizes: | | Decorative buttons NORMAL white - size 18 | | Eur 22,- | | Decorative buttons NORMAL white - size 20 | | Eur 22,- | | Decorative buttons NORMAL white - size 22 | | Eur 22,- | | Decorative buttons NORMAL white - size 24 | | Eur 22,- | | Decorative buttons NORMAL white - size 28 | | Eur 26.3,- | | Decorative buttons NORMAL white - size 30 | | Eur 26.3,- | | Decorative buttons NORMAL white - size 32 | | Eur 30.9,- | | Decorative buttons NORMAL white - size 36 | | Eur 30.9,- | | Decorative buttons NORMAL white - size 40 | | Eur 38.6,- | | Decorative buttons NORMAL white - size 44 | | Eur 38.6,- | | Decorative buttons NORMAL white - size 50 | | Eur 50.4,- | | Decorative buttons NORMAL white - size 60 | | Eur 56.8,- |
|
from Eur 22,- net of VAT |
|
Decorative buttons NORMAL (alu -plastic, 1000 pc., black) size from 18 to 60
| Buttons bodies (black botom part) with fixed eyelet is fit for make upholstery. decorative knobs. You can coate this knob with many types of materials. For example, You can use this knobs as decorative knobs for suits, blouses, handbags. Price for package 1000 pcs (1000 pcs bottom part and 1000 pcs upper part). | | Tech. specification: Type: knob NORNMAL with fixed eyelet |
Bottom part: plastic / black color |
Upper (cap) part: aluminum |
Upper part size: according to the selected size |
Sizes: 18 - avg. 11 mm, 20 - avg. 12 mm, 22 - avg. 14 mm, 24 - avg. 15 mm, 28 - avg. 18 mm, 30 - avg. 19 mm, 32 - avg. 20 mm, 36 - avg. 22 mm, 40 - avg. 26 mm, 44 - avg. 28 mm, 50 - avg. 32 mm, 60 - avg. 38 mm | | | Detail: Bottom knob element with fixed eyelet and alluminum upper part is fit for make decorative knobs or buttons. You can know it from suit, blouse, handbag. For aplication we recommended our Closer for knobs, our mechanical press and Churning rod (pestle). It is easy way for producing own decorative knobs. |
|
| Sizes: | | Decorative buttons NORMAL black - size 18 | | Eur 22,- | | Decorative buttons NORMAL black - size 20 | | Eur 22,- | | Decorative buttons NORMAL black - size 22 | | Eur 22,- | | Decorative buttons NORMAL black - size 24 | | Eur 22,- | | Decorative buttons NORMAL black - size 28 | | Eur 26.3,- | | Decorative buttons NORMAL black - size 30 | | Eur 26.3,- | | Decorative buttons NORMAL black - size 32 | | Eur 30.9,- | | Decorative buttons NORMAL black - size 36 | | Eur 30.9,- | | Decorative buttons NORMAL black - size 40 | | Eur 38.6,- | | Decorative buttons NORMAL black - size 44 | | Eur 38.6,- | | Decorative buttons NORMAL black - size 50 | | Eur 50.4,- | | Decorative buttons NORMAL black - size 60 | | Eur 56.8,- |
|
from Eur 22,- net of VAT |
|
Decorative buttons LORD with swivel eyelet - upholstery (alu - steel, 1000 pc.) size from 24 to 40
| Buttons bodies with floating handle (wire eyelet) is fit for make decorative, upholstery knobs. You can coate this button with many types of materials. For example, You can use this knobs as decorative knobs for guru jacket or coat. Price for package 1000 pcs (1000 pcs bottom part and 1000 pcs upper part). | | Tech. specification: Type: button LORD with eyelet |
Bottom part: aluminum / steel screws |
Upper (cap) part: aluminum |
Eyelet (floating handle)) part: steel wire |
Eyelet size: aprox. 4 mm |
Upper part size: according to the selected size |
Sizes: 24 - avg. 15 mm, 28 - avg. 18 mm, 30 - avg. 19 mm, 32 - avg. 20 mm, 36 - avg. 22 mm, 40 - avg. 26 mm, 44 - avg. 28 mm, 50 - avg. 32 mm, 60 - avg. 38 mm | | Detail: Bottom alluminium button element with swivel eyelet and alluminum upper part is fit for make decorative knobs or buttons. You can know it from winter coats and so on. For aplication we recommended our Closer for knobs and our mechanical press. It is easy way for producing own decorative knobs or buttons. |
|
| Sizes: | | Decorative buttons LORD with swivel eyelet - size 24 | | Eur 33.5,- | | Decorative buttons LORD with swivel eyelet - size 28 | | Eur 33.5,- | | Decorative buttons LORD with swivel eyelet - size 32 | | Eur 40.7,- | | Decorative buttons LORD with swivel eyelet - size 36 | | Eur 40.7,- | | Decorative buttons LORD with swivel eyelet - size 40 | | Eur 46.2,- |
|
from Eur 33.5,- net of VAT |
|
Decorative buttons LORD with nail - upholstery (alu - steel, 1000 pc.) size from 24 to 40
| Buttons bodies with steel nail (brad) is fit for make upholstery. decorative knobs. You can coate this knob with many types of materials. For example, You can use this knobs with nail as decorative knobs on sofa. Price for package 1000 pcs (1000 pcs bottom part and 1000 pcs upper part), we can deliver 100 units too. | | Tech. specification: Type: knob LORD with nail |
Bottom part: aluminum / steel screws |
Upper (cap) part: aluminum |
Nail Size: 50 x 2.1 mm |
Upper part size: according to the selected size |
Sizes: 24 - avg. 15 mm, 28 - avg. 18 mm, 30 - avg. 19 mm, 32 - avg. 20 mm, 36 - avg. 22 mm, 40 - avg. 26 mm, 44 - avg. 28 mm, 50 - avg. 32 mm, 60 - avg. 38 mm | | | Detail: Bottom knob element with steel nail and alluminum upper part is fit for make decorative knobs or buttons. You can know it from sofa or couch. For aplication we recommended our Closer for knobs, our mechanical press and Churning rod (pestle). It is easy way for producing own decorative knobs. |
|
| Sizes: | | Decorative knobs LORD with nail - size 24 | 05007511 | Eur 105.5,- | | Decorative knobs LORD with nail - size 28 | 05007513 | Eur 108.5,- | | Decorative knobs LORD with nail - size 32 | 05007515 | Eur 111.4,- | | Decorative knobs LORD with nail - size 36 | 05007517 | Eur 114.4,- | | Decorative knobs LORD with nail - size 40 | 05007519 | Eur 118.2,- |
|
from Eur 82.5,- net of VAT |
|
Decorative buttons LORD with screw - upholstery (alu - steel, 1000 pc.) size from 24 to 40
| Buttons bodies with steel screw is fit for make decorative, upholstery knobs. You can coate this knob with many types of materials. For example, You can use this knobs with screw as decorative knobs on sofa. Price for package 1000 pcs (1000 pcs bottom part and 1000 pcs upper part), we can deliver 100 units too. | | Tech. specification: Type: button LORD with screw |
Bottom part: aluminum / steel screws |
Upper (cap) part: aluminum |
Screw Size: 35 x 4 mm |
Upper part size: according to the selected size |
Sizes: 24 - avg. 15 mm, 28 - avg. 18 mm, 30 - avg. 19 mm, 32 - avg. 20 mm, 36 - avg. 22 mm, 40 - avg. 26 mm, 44 - avg. 28 mm, 50 - avg. 32 mm, 60 - avg. 38 mm | | | Detail: Bottom knob element with black steel screw and alluminum upper part is fit for make decorative knobs or buttons. You can know it from sofa or couch. For aplication we recommended our Closer for knobs and our mechanical press. It is easy way for producing own decorative knobs. |
|
| Sizes: | | Decorative knobs LORD with screw - size 28 | | Eur 110.5,- | | Decorative knobs LORD with screw - size 32 | | Eur 110.5,- | | Decorative knobs LORD with screw - size 32 | | Eur 115.6,- | | Decorative knobs LORD with screw - size 36 | | Eur 115.6,- | | Decorative knobs LORD with screw - size 40 | | Eur 120.7,- |
|
from Eur 110.5,- net of VAT |
|
Decorative buttons KOTVICKA - upholstery (plastic, bottom part only, 1000 pc.) size 30
| Buttons bodies with hook is fit for decorative knobs precision fixation. You can use this body with standard upper part size 30. Package 1000 pcs. | | Tech. specification: Type: knob KOTVICKA with hook |
Part: only Bottom part from plastic |
You can use: Upper (cap) part from knobs size 30 |
Upper part size: 30 (avg. 19 mm) | | | Detail: Bottom knob element from plastic with hook is fit for fixation some decorative knobs or buttons to materials. You can put this body from bottom side, decorative knobs to top. You can know it from seat, sofa or couch. |
|
Eur 27.5,- net of VAT |
|
Churning rod - upholstery pestle for corpuscles with spikes - for size from 24 to 40
| Upholstery churning rod is fit for glands ornamental buttons application with nail. Upholstery thumpers with sizes 24, 28, 32, 36, 40, all sizes for one price. Price for one ps. | | Tech. specification: Construction: wood / metal or metal / metal |
Typical application: for application knob. bodies with nail |
For knob. with size: 24, 28, 32, 36, 40 |
Can be made to order according to your wishes | | | Detail: Only on your demand. Sizes 24, 28, 32, 36, 40 to 1 week. Other sizes and types we make for your reguest. |
|
not available |
|
Die cut oval (special, bespoke)
| Be instrumental towards cut matters - trimming for all types marketed press. on all kinds of button and quoits. | | Tech. specification: At orders please bring in: |
average segment (what circle need cut, foreground. head. button) |
on what press will using (tzn. way gripping) |
near hereof cut proportions segment: 16 x 3.2 mm | | | Detail: Execution according to your accurate requirements. For every size eye or button matches other size. |
|
from Eur 39,- net of VAT |
|
Tools for trousers hook
| Tools for stamping trousers hook for stamping by pneumatic, hand and electric press. | | Tech. specification: We produce pressing tool on your demand. | | Detail: Produce all sizes tool on stamping hooks. Tool execution from very first-rate material. Tool execution according to of your requirements. Price in a couple of (lower and upper part). |
|
from Eur 33.9,- net of VAT |
|
Die cut rectangle (special, bespoke)
| Be instrumental towards cut matters - trimming for all types marketed press. For all kinds of button and quoits. | | Tech. specification: At orders please bring in: |
average segment (what circle need cut, foreground. head. button) |
on what press will using (way gripping) |
near hereof cut proportions segment: 105 x 50 mm | | | Detail: Execution according to your accurate requirements. For every size eye or button matches other size. |
|
from Eur 40.3,- net of VAT |
|
Plastic pad
| Pad made from material NOVODUR, be instrumental towards enshrinement sharp edge cutting off at clicking material | | Tech. specification: Material: Novodur |
Size: 90 mm x 100 mm |
Size according to your requirements | | Detail: Special plastic pad. |
|
Eur 1.6,- net of VAT |
|
Plastic pad for additional table for press PL25 and RBL 27
| Pad made from material NOVODUR, be instrumental towards enshrinement sharp edge cutting off at clicking material. Special pad for table. | | Tech. specification: Material: Novodur |
Size: 95 mm x 105 mm |
Size according to your requirements | | Detail: Special plastic pad. |
|
not available |
|
Additional table with plastic pad for press PL25 and RBL 27
| Specially mature bedside table allows cutting at universal press RBL27.
Bed made from material NOVODUR, be instrumental towards enshrinement sharp edge at clicking material. Bedside table be invested with special milled mats. | | Tech. specification: Material table: Fe |
material pads: Novodur |
size base: 95 mm x 105 mm |
bespoke you very produce mats and bedside table according to you requisite sizes. |
bed for this bedside table specially milled |
altitude bedside table vc. mats: 18 mm |
altitude bedside table without mats: 9 mm |
average thorn: 12 mm |
altitude thorn: 11 mm | | | Detail: Interpolation hereof special bedside table for cutting at press RBL27 espressivo zefektivnite work with herewith press.
Bedside table be invested with thorn, which sink accurately to the lower opening press (single-level memory tool change cut / shut button).
|
|
not available |
|
Membrane, bladder for BRERO 133
| Special new membrane for pneumatical press BRERO 133 from rubber! | | Tech. specification: Overall dimension: 150x150x30 |
For working pressure: about 5Mpa |
| | Detail: We ensure other spares! |
|
Eur 381.4,- net of VAT |
|
Press HL 1
| Hand pectineal press 1 t. | | Tech. specification: Weight 15 Kg | | | Detail: High power press. |
|
Eur 208.1,- net of VAT |
|
Press HL 2
| Hand pectineal press 2 t. | | Tech. specification: Weight 34 Kg | | | Detail: Strong press. |
|
| Other accessories: | | Undercart with wheels | | Eur 105.9,- |
|
on demand |
|
Foot-press LSN1
| Very strong and robust press, operated legs.
| | Tech. specification: Weight 17.2 kg |
For installation on table |
Altitude foot-operated shoulders 900 mm | | | Detail: Advise quoits firm Èernický KOH-I NOOR. More find in caregory: Press for car cover. |
|
not available |
|
Press VL 15
| Hand saddle press. | | Tech. specification: Stroke 15 mm |
Altitude 350 mm |
Working setout 75 mm |
Input peg average 24 mm |
Luminosity 100 mm |
Lower opening 12 mm |
Thread in peg M10, M16 |
Weight 20 Kg | | | Detail: Big press. |
|
not available |
|
Pneumatical press with electrical control
| Small electrically operated pneumatic press with two-hand trigger. This press was offered as a bargain and has already been sold. upon agreement, we can supply several pieces of similar presses. | | Tech. specification: Overall dimension: 700x550x1040 |
altitude dine portfolio: 780 mm |
working pressure: about 5Mpa |
lower opening: about 11 mm |
top connection: about 10 mm |
(get, modification for Your implement) |
operating: with both hands, el. contact-maker |
setout: 42 mm |
lifting height: about 50 mm | | | Detail: Transmission pressure is secured currency pneumatic piston. Press delivery with bedside table. Single parts press is current pneu lead and electron divorce with switch-board and control device. Safety element answering data production! El. output for closure lighting. |
|
not available |
|
Electrical press SVIT Zlín - bazaar
| Small electrically press with vackovym system transmission force on lower pressing piston. Available 3 shreds! After settlements possibility demonstrate! | | Tech. specification: Overall dimension: ? (d x s x in) |
altitude dine portfolio: ? mm |
lower opening: ? |
top connection: ? |
(get, modification for Your implement) |
operating: footswitch |
setout: ? mm |
lifting height: c.. ? mm | | | Detail: Press delivery with bedside table.
Single parts press they are current electron divorce. Safety element answering data production! S lighting working trestleboard. |
|
Eur 1192.8,- net of VAT |
|
Cutting circled press PL-151
| Multipurpose arrangement destined for shouldering car cover steel quoits. Cut trought car cover and forcing-in quoits in one’s operation. | | Tech. specification: Proportions: 400 x 920 x 980 mm |
Setout pressing head 80 mm |
Maximum average cutting tools 42 mm |
Service pressure 0.5 - 20 MPa |
Cutting stroke 20 - 48 mm |
Time working cycle 4 sec. |
Materiality pressing troop 27 Kg |
Materiality hydraulic troop with filling (oil) 49 Kg |
Input 1.2 kW |
Supply voltage 230 V, 50 Hz | | | Detail: Cutting press is compact arrangement crimping from mobile pressing troop and mobile undercart with electronic aggregate. Bases press is continuously controllable special telescopic hydraulic cylinder with die. Press on some operation cut out to the goods opening and provide him metal quoits, which behind-lines. This way fulfilment operation abbreviate time scallop and export troublesome needlework. Press allows fast and easy exchanges cutting room and die different size and form. At work can sit on undercart and this way wait on pressing troop. |
|
| Detail: | | Only press PL - 151 | | Eur 8542.4,- | | Cutting press tool | | Eur 1093.2,- |
|
Eur 8542.4,- net of VAT |
|
Press PP 300 - pneumatical
| Pneumatic press, very high accuracy (equipped laser with lentil, which exactly show place using), efficient, simple operation. | | Tech. specification: Proportions 440 x 120 x 270 mm |
Stroke: 50 mm |
Add. proportions lower: 12 mm hole |
Add. proportions upper: 5 mm hole thread |
Screen: mechanical canopy sizes 60 mm x 48 mm |
Supply pressure: 2 - 10 Mpa |
Proportions air cylinder: 95 x 180 mm |
Air cylinder: pillion, geminate | | | Detail: Equipped protective fence prohibitive injury finger. May be on the table set according to requirements and two side by side ( one slaughter potholes, second shut rivet).Single parts is table. Need compressed air. Working pressure 2-10 bar. Price without bedside table.
|
|
not available |
|
Pneumatical press STOCKO WP502L (bazaar)
| Excellent pneumatic press Germany production, brands Stocko, type WP502L.
Control with mechanical switch.
Available last piece! After settlements possibility demonstrate! | | Tech. specification: Overall dimension: 330x170x380 mm |
working pressure: 5Mpa |
lower opening: 14 mm (M14) |
top connection: M6 |
pneumatic element: Festo |
switching: mechanical security wardships |
(get, modification for Your implement)
setout: 100 mm |
working altitude: 50 mm |
proportion base: 150 x 170 mm | | | Detail: Transmission pressure is secured currency piston over rubber membrane. Press delivery without bedside table.
Single parts press is pneu lead. Safety element answering data production! |
|
not available |
|
Pneumatical press BRERO 133 - bazaar
| Excellent and first-rate pneumatic press Swiss production, brands Brero, type 133. Foot control air break switch. | | Tech. specification: Overall dimension: 300x220x500 |
working pressure: about 5Mpa |
lower opening: about 20 mm (M20) |
top connection: about 12 mm |
(get, modification for Your implement) |
pressure control 1 - 10 bar |
foot control: pneumatic |
setout: 48 mm |
lifting height: about 60 - 85 mm | | | Detail: Transmission pressure is secured currency piston over rubber membrane. Press delivery without bedside table. Single parts press is pneu lead, foot-operated pneu. contact-maker, pressure control and separator. Safety element answering data production! |
|
Eur 974.6,- net of VAT |
|
Press Sazavan UNI2 (repassed)
| Press Sazavan pre-eminence it's high reliability and functional structural design. | | Tech. specification: Stroke 22 mm |
Working setout 70 mm |
Working altitude adjustable until 60 mm |
Lower opening 12 mm |
Weight 120 Kg |
| | Detail: Tension 400V, input 750W... Price be merely informative, in prices isn't inclusion auxiliary bedside table. Subjects price fixing department offers too are not safeness element in terms of valid CE and specification. Machine be invested with security. element necessary on the date production machinery security falling stopper.
|
|
not available |
|
