On-line catalogue - english


Machines for textile, paper & other materials

 Back to the full catalog listing 

Perch, rewinding machines, packing machine

 Back to category 
Click to open Cutting machine PSK 600 larger
Open Cutting machine PSK 600 at official web site (new window)

Cutting machine PSK 600


After winding the required layer of fine paper material onto the drum, it is cut and stretched onto conveyors, where it is automatically cut to the required dimensions. The system with servomotors is fully controlled by pulses, which achieves a speed of up to 3m/s in the case of the drum (winding) and with a tolerance of 0.2 mm in the case of conveyor displacements.
Tech. specification: Max. machine input: 6.8 kW | Current system: 3+N+PE TN-S | Supply voltage: AC 400V, 50Hz | Max. operating pressure of compressed air: 6 bar | Noise level at the workplace: < 75 dB | Max. winding speed: 3.6m/s | Max. tolerance of conveyor position: 0.1 mm | Max. machine dimensions (L x H x W): 13320 x 3155 x 2680 mm | Total weight of the machine: 1600 kg |
Detail: The complete machine consists of four main parts: | 1. 2x Unwinder | 2. 2x Compensator | 3. Drum winding system (length approx. 3600 mm) | 4. Formatting with a pair of conveyor belts The device is intended for unwinding the material according to the sample supplied by the customer. It is used exclusively for unwinding material from rolls, winding on a winding drum, placing the winding on a conveyor belt and dividing it into final blanks. The design of the machine is chosen simply and purposefully to achieve easy and safe control by the operator. The safety of the machine is ensured by a complex system consisting of a programmable Reer Mosaic safety module together with a gate with forced locking and several magnetic sensors and mushroom buttons. The system is controlled by a Kinco K6 PLC with Ethernet and 8 pulse outputs. The PLC is extended by 6 additional IO modules. A 10-inch HMi touch screen is used for control. The system is connected to remote management using VPN. Other specifications: | input material: paper 2-3 layers | weight of input roll: 300 kg | max. diameter of the roll at the entrance: 1300 mm | material width at the entrance: 200, 400 and 600 mm | inner diameter of the sleeve: 75 mm | format wound on a drum: 3600 x 200/400/600 mm ( l,w ) | final blanks: 200-600mm x 200/400/600 mm ( l,w ) | wound layer on the drum: 80mm |
on demand
Click to open Winding and folding machine for nonwovens larger
Open Winding and folding machine for nonwovens at official web site (new window)

Winding and folding machine for nonwovens


The folding machine is designed for packing (folding) nonwovens into a package. The machine measures the required length and winds the required charge (length) using automatically adjustable mandrels. The operator removes the material and transverse assembly into the package.
Tech. specification: Max. machine power: 9.4 kW | Current system: 3 + N + PE TN-S | Supply voltage: AC 400V, 50Hz | Max. compressed air operating pressure: 6 bar | Workplace noise: <75 dB | Max. machine dimensions (l x w x h) with material: 5900 x 4500 x 2200 mm | Max. material width: 1600 mm | Gross weight: 1600 kg |
Detail: The complete machine consists of four main parts: | 1. Unwinder | 2. Compensator | 3. Towing and cutting assembly | 4. Winding system | | The device is one service and is designed for cutting and winding nonwovens, according to samples supplied by the customer. It is used for material removal, division, winding according to the required specifications on the winding mandrels, where the finished product is ready for manual removal. | | The design of the machine is chosen simply and efficiently to achieve easy and safe operation by the operator. For the safety of the operator, the moving parts of the machine are equipped with safety fencing.
 on demand
Click to open Winding and folding machine for nonwovens larger
Open Winding and folding machine for nonwovens at official web site (new window)

Winding and folding machine for nonwovens


The duplicator is a device for folding a nonwoven fabric of the basic width of the material in half. The winding speed is controlled depending on the charge of the unwinder, the compensator ensures winding in a predefined tension. The special construction for folding the material is fully adjustable. The machine is equipped with straightening edges. Both the winder and the unwinder are equipped with pneumatic expansion shafts for easy roll change.
Tech. specification: Max. machine power: 9.15 kW | Current system: 3 + N + PE TN-S | Supply voltage: AC 400V, 50Hz | Supply fuse: C 16A | Control voltage: DC 24V | Protection: IP54 | Max. compressed air operating pressure: 6 bar | Workplace noise: <75 dB | Max. inlet material width: 3200 mm | Output material width: up to 1600 mm |
Detail: The complete machine consists of four main parts: | 1. Unwinder | 2. Compensator with side straightening | 3. Own transhipment structures | 4. Spreading roller | 5. Winding system | | The device is one service and is designed for translating non-woven fabrics in half and winding them, according to samples supplied by the customer. | | The design of the machine is chosen simply and efficiently to achieve easy and safe operation by the operator. For the safety of the operator, the moving parts of the machine are equipped with safety fencing.
on demand
Click to open Perching and rewinding machine PS2H/MIL larger
Open Perching and rewinding machine PS2H/MIL at official web site (new window)

Perching and rewinding machine PS2H/MIL


Machine be intended for rewinding, straightening margin role, admeasurement textile material to the breadth according to contract. Machine winding-on on paper cup. Machine is able to and translate limit material (before sealing-in and next processing).
Tech. specification: Potential AC 400 V | Input 2000 W | Proportions 2250 x 3200 x 950 mm | Max. average on entrance 550 mm | Max. breadth material 2000 mm | Max. average input and check out 550 mm | Max rate rewinding 60 m/min | Perching rate 20 m/min | Proportion paper cup (average) 76 ( according to orders) mm | Supply compressed air 0.6 MPa | Materiality 175 Kg | Noisiness inferior to 70 dB |
Detail: strong construction | fluent start and stopping with possibility setting preferences longitude | distance measurement homologation Czech metrological institute | unreeling from cup | peripheral winding on cup with straightening margin winding without textile tension |
from Eur 11652.5,- net of VAT
Click to open Perching and rewinding machine PS3/GA larger
Open Perching and rewinding machine PS3/GA at official web site (new window)

Perching and rewinding machine PS3/GA


This machine be intended for rewinding and perching textile. Machine fall from four fundamental whole (decoiler, perching board, foot bridge and winder), whose alignment is laid threaded joint.
Tech. specification: Tension: AC 400 V, 50 Hz | Input: 3800 W | Tension info: TN-S, 3+N+PE | Control voltage: DC 24 V | Max. proportions: 5300 x 3800 x 2400 mm | Weight: 970 kg |
Detail: strong construction | fluent start and stopping with possibility setting preferences longitude | distance measurement homologation Czech metrological institute | unreeling from cup | peripheral winding on cup with straightening margin winding without textile tension | big perching board |
on demand
Click to open Rewinding and measuring machine PS - 4 / FX larger
Open Rewinding and measuring machine PS - 4 / FX at official web site (new window)

Rewinding and measuring machine PS - 4 / FX


Machine PS-4/FX is fit for rewinding, measuring and inspecting special material types floor heating mats.
Tech. specification: Tension: AC 400 V, 50 Hz | Input: 1000 W | Control voltage: DC 24 V | Max. proportions machinery: 2200 x 1900 x 2300 mm | Machine weight: 390 kg |
Detail: Machine is identified primarily to custom admeasurement material before packaging.
 on demand
Click to open Perching and rewinding machine PS-C1/TI larger
Open Perching and rewinding machine PS-C1/TI at official web site (new window)

Perching and rewinding machine PS-C1/TI


Machine PS-C1 be intended for rewinding and admeasurement special material type window sheeting TwinAktiv to cops or roll.
Tech. specification: Tension: AC 230 V, 50 Hz | Input: 500 W | System: TN+S 1+N+PE | Control voltage: DC 24 V | Max. proportions machinery (d x s): 4350 x 1250 mm | Machine weight: 138 kg |
Detail: Machine is identified primarily to custom admeasurement material Illbruck TwinAktiv. At machine can be spool whole gamut these material. Machine was possibility alter all characteristics and use him so on whole assortment.
 on demand
Click to open Automatic rewinding, admeasurement, cutter and baling machine N-A3/IF larger
Open Automatic rewinding, admeasurement, cutter and baling machine N-A3/IF at official web site (new window)

Automatic rewinding, admeasurement, cutter and baling machine N-A3/IF


Machine N-A3 be intended for rewinding, admeasurement, cutting and package roll plastic material in fully automatic regime.
Tech. specification: Tension: AC 230 V, 50 cps | Input machinery: 500 W | Compressed air pressure: 6 bar | System: 1+N+PE | Control voltage: DC 24 V | Max. proportions machinery (d x s x in): 3200 x 1300 x 2300 mm | Machine weight: 274 kg |
Detail: Automatic machine is drawn for of the three shift running. Unreeling material with chamber loops on in advance laid longitude and after fulfilment cut wrapping to the roll with turn by tapes. Wrapt roll drop into set boxing.
on demand
Click to open Perching and rewinding machine PS-1M/1500 larger
Open Perching and rewinding machine PS-1M/1500 at official web site (new window)

Perching and rewinding machine PS-1M/1500


Machine be intended for rewinding and admeasurement textile material to the breadth according to contract. Machine winding-on on paper cup. Machine is fulfilment modular from constructional aluminium section, according to requirements consumer.
Tech. specification: Potential AC 230 V | Input 2000 W | Proportions 2440 x 1760 x 2200 mm | Max. average on entrance 550 mm | Max. breadth material 1750 mm | Max. average input and check out 550 mm | Max rate rewinding 55 m/min | Perching rate 20 m/min | Proportion paper cup (average) 40/46 ( according to orders) mm | Supply compressed air 0.6 MPa | Materiality 250 Kg | Noisiness inferior to 70 dB |
Detail: constructional conception | fluent start and stopping with possibility setting preferences longitude | distance measurement homologation Czech metrological institute | unreeling from cup or uvwinding baskets | peripheral winding on cup |
on demand
Click to open Winding machine NS2 larger
Open Winding machine NS2 at official web site (new window)

Winding machine NS2


Winding machine destined for winding cotton knitwork to the neat packs
Tech. specification: Longitude machinery 1100mm | Altitude 320 mm | Latitude 350 mm | Tension AC230/DC12 V | Input to the 200 W |
Detail: It is manual arrangement drive electric motor, which using special baling tool winding-on roll, packs from input zone material.
 on demand
Click to open Winding machine NS1 larger
Open Winding machine NS1 at official web site (new window)

Winding machine NS1


Winding machine destined for winding cotton knitwork to the neat packs
Tech. specification: Longitude machinery 1000mm | Altitude 300 mm | Latitude 300 mm | Tension AC230/DC12 V | Input to the 200 W |
Detail: It is manual arrangement drive electric motor, which using special baling tool winding-on roll, packs from input zone material.
 on demand



Back to full catalog listing      Print the selection      Gop to back to main page



© copyright 2006-2024 ROBEX DK, s.r.o.® , change restricted …
webdesign ROBEX DK, s.r.o.
Website of ROBEX DK, s.r.o. use cookies. We use this file and information to analyze information about our visitors, to improve our website, to display personalized content and to provide you with a great web experience. More info here!

DETAILED SETTINGS
:: InstalaceZTI.cz ::