Accessories for production plants & machines (measure) |
 |
Length measurement, measuring wheels, counters and other accessories for automation |
 |
 |
Rotary incremental hall encoder ABZ with pulse output Heinelberg AMI
| Incremental rotary encoder with pulse output ABZ is designed for bidirectional distance counting. Power supply DC 12 - 24 V with 6 mm shaft and 3m cable. Available in 128, 256, 512 pulses per revolution (512, 1024, 2048 ppr). | | Tech. specification: Kind: rotary encoder |
Type: incremental (CW / CCW) |
Sensor: electromagnetic (hall) |
Output: voltage, ABZ signals |
Housing: diameter 35,5mm, shaft diam. 6mm, length 15mm |
Cover material: ABS plastic with white/grey color |
Main unit material: alluminium |
Shaft material: stainless steel
Supply voltage: 12–24V DC
Interface: transistor PNP switching |
Cutoff frequency: ≥180kHz |
Total system prop. delay: ≤92µS |
Rise and fall times: >10V/1µS (kabel délka 500 mm a impedance 5kΩ) |
Current consumption: max. 150mA |
Insulation resistance: min. 100MΩ (při 500V DC) |
Dielectrics strenght: 500V DC po dobu 1 min.
Max. mechanical speed: 5000 rpm. |
Degree of protection: IP50 (EN60 529) |
Operation temperature: -15°C (no ice) to 70°C (humidity 35-85%) |
Max. shaft loading: 20N radial, 30N thrust |
Vibration resistance: 10-500Hz, ≤100m/s² (EN60 068-2-6) |
Shock resistance: 6ms, ≤300m/s² (EN60 068-2-27) |
Moment of inertia: ≤0.5 x 10(-6)kgm² |
Starting torque: ≤0.1 Nm max. (at 20°C)
Connection: 3m cable (8C) |
Wire: brown +DC, blue 0V, white - A, green - B, white - Z impuls
Each encoder includes a test sheet from the output control | | | Detail: High-precision AMI electromagnetic encoders from manufacturer Heinelberg.Output B is shifted by 1/2 pulse A (1 / 4T = 90 °). Output Z is interpreted 1 x per turn (good for Origin function or for rotational speed sensing) |
|
| Type: | | Rottary incremental encoder AMI H 128imp/ot (512ppr) ABZ | | Eur 97.7,- | | Rottary incremental encoder AMI J 256imp/ot (1024ppr) ABZ | | Eur 102.3,- | | Rottary incremental encoder AMI O 512imp/ot (2048ppr) ABZ | | Eur 113.6,- |
|
from Eur 113.6,- net of VAT |
|
Incremental measuring wheel (encoder) ROB K128 for high speed ( res. 2.5 mm)
| The ROB K128 incremental measuring wheel encoder is a costeffective
and extremely compact solution for the length measurement etc. Our incremental measuring wheel can be used with counter ROB 210 or ROB 2000. Basic version with high adhesive wheel is ideal for normal materials measuring with resolution to 2.5 mm and max. speed 5.5 m/s. | | Tech. specification: Type: ROB K128 (basic model for hi-speed measure) |
Usability: continuous length measurement (countup / countdown) |
Purpose: for length measure (longitude counter), fit for install on machines |
Design: professional compact, shaft with roller bearings |
Mounting: by screw with thread to the joint holder (universal)
Measurement method: transfer from the rotation wheel |
The measurement: by incremental encoder with direction distinguish |
Rotary encoder type and properties: 100 imp. / 1 turn (profi) |
Basic wheel type: X Worker with dia. 70 mm, active width 47 mm (width 52 mm), hardness 82A
Power supply: 5 - 24 V DC |
Output: pulse with potential PNP (voltage output) |
Single high level: min.VCC-2,5V |
Single low level: max.0,4V |
Rising and declining time: max. 1 ns |
Max. output frequency: to 300kHz |
Resolution unit: edge of output pulse |
Duty-cycle: 1:1 ±10% |
Phase shift pulse: 90° ± 45° (more in Other photo section) |
Wiring: brown - power supply (+5 to 24V DC), blue - power supply (0V DC), yellow - OUT Z (zero - normally you do not need it) white - OUT A - impulse for countup, green - OUT B - impulse for countdown |
Working temperature: from -30°C to +85°C |
Protection class: IP 54 |
Vibration proof: 10G / 10 - 2000 Hz |
Shock resistance: 50G / 11 ms |
Max. current load: 40 mA |
Current consumption: max. 80 mA |
Cable longitude: 1 m |
Cable type: 5 x 0.16 mm2
Measure resolution: 2.2mm (basic. wheel X), 1.7mm (XS), 2.7mm (XL) |
Recommended measure speed (for ROB counters): 5.5m/s (basic. wheel X), 4.3m/s (XS), 6.7m/s (XL) |
Max measure speed (6kHz): to 10000 mm / s
Proportions (l x w x h): aprox. 225 x 110 x 70 mm |
Note: height 70 mm with basic wheel (you can use XS or XL wheels too) |
Total weight (without weights): 705 gr.3D Model CAD (STEP, IGS) for download (RAR) | | Detail: The basis of the product is the ROB K100 incremental encoder. You can replace standard wheel for two other types. You can also apply weights for soft materials measuring.
Special design making the ROB K100 extremely robust and resistant to shock and vibration. Accuracy (100 imp. / 1 turn = superior about 2.5 mm), steel and aluminum parts for the best quality, shaft on two bearings and universal mounting using the joint and segment with thread M6. It is our measuring wheel named ROB K128 .
The product versatility enables many uses, e. g. in: Woodworking machinery, Steel and sheet processing, machinery, Storage and conveying technology, Sorting systems, Conveyor belts, Textile machinery, Printing and paperYou can replace standard wheel X Worker with dia. 70 mm and width 47 mm for other two types. The smallest wheel with dia. 55 mm and width 23,5 mm for high accuracy or the narrow wheel with dia. 85 mm and width 13 mm for hard materials measurement. |
|
| Accessories: | | Other wheel XS (small dia. 55 mm, width 23,5 mm) | | Eur 11.7,- | | Other wheel XL (high dia. 85 mm, narrow 13 mm) | | Eur 12.5,- | | Basic wheel X Worker (dia. 70 mm, width 47 mm) | | Eur 13.6,- |
|
Eur 186.2,- net of VAT |
|
Incremental measuring wheel (encoder) ROB K500 with high accuracy (res. 0.5 mm)
| The ROB K500 incremental measuring wheel encoder is a costeffective
and extremely compact solution for the length measurement etc. Our incremental measuring wheel can be used with counter ROB 2000. Basic version with high adhesive wheel is ideal for normal materials measuring with resolution to 0.5 mm and speed to 1 m/s. | | Tech. specification: Type: ROB K500 (basic model with high accuracy) |
Usability: continuous length measurement (countup / countdown) |
Purpose: for length measure (longitude counter), fit for install on machines |
Design: professional compact, shaft with roller bearings |
Mounting: by screw with thread to the joint holder (universal)
Measurement method: transfer from the rotation wheel |
The measurement: by incremental encoder with direction distinguish |
Rotary encoder type and properties: 500 imp. / 1 turn (profi) |
Basic wheel type: X Worker with dia. 70 mm, active width 47 mm (width 52 mm), hardness 82A
Power supply: 5 - 24 V DC |
Output: pulse with potential PNP (voltage output) |
Single high level: min.VCC-2,5V |
Single low level: max.0,4V |
Rising and declining time: max. 1 ns |
Max. output frequency: to 300kHz |
Resolution unit: edge of output pulse |
Duty-cycle: 1:1 ±10% |
Phase shift pulse: 90° ± 45° (more in Other photo section) |
Wiring: brown - power supply (+5 to 24V DC), blue - power supply (0V DC), yellow - OUT Z (zero - normally you do not need it) white - OUT A - impulse for countup, green - OUT B - impulse for countdown |
Working temperature: from -30°C to +85°C |
Protection class: IP 54 |
Vibration proof: 10G / 10 - 2000 Hz |
Shock resistance: 50G / 11 ms |
Max. current load: 40 mA |
Current consumption: max. 80 mA |
Cable longitude: 1 m |
Cable type: 5 x 0.16 mm2
Measure resolution: 0.44mm (basic. wheel X), 0.35mm (XS), 0.53mm (XL) |
Recommended measure speed (for ROB counters): 1.1m/s (basic. wheel X), 0.9m/s (XS), 1.3m/s (XL) |
Max measure speed (6kHz): to 2000 mm / s
Proportions (l x w x h): aprox. 225 x 110 x 70 mm |
Note: height 70 mm with basic wheel (you can use XS or XL wheels too) |
Total weight (without weights): 705 gr.3D Model CAD (STEP, IGS) for download (RAR) | | Detail: The basis of the product is the ROB K500 incremental encoder. You can replace standard wheel X Worker for two other types. You can also apply weights for soft materials measuring.
Special design making the ROB K500 extremely robust and resistant to shock and vibration. High accuracy (500 imp. / 1 turn = superior then 1 mm), steel and aluminum parts for the best quality, shaft on two bearings and universal mounting using the joint and segment with thread M6. It is our measuring wheel named ROB K500.
The product versatility enables many uses, e. g. in: Woodworking machinery, Steel and sheet processing, machinery, Storage and conveying technology, Sorting systems, Conveyor belts, Textile machinery, Printing and paperYou can replace standard wheel X Worker with dia. 70 mm and width 47 mm for other two types. The smallest wheel with dia. 55 mm and width 23,5 mm for high accuracy or the narrow wheel with dia. 85 mm and width 13 mm for hard materials measurement. |
|
| Accessories: | | Other wheel XS (small dia. 55 mm, width 23,5 mm) | | Eur 11.7,- | | Other wheel XL (high dia. 85 mm, narrow 13 mm) | | Eur 12.5,- | | Basic wheel X Worker (dia. 70 mm, width 47 mm) | | Eur 13.6,- |
|
Eur 203.2,- net of VAT |
|
Mechanical counter UDC
| UDC Taly counter can be mounted on table or clip board, or used as a hand tally counter Counts up to 9999 quick reset knob. | | Tech. specification: At store is about 15 pc. | | Detail: Thanks special ergonomically hereof abacuses it is possible reach for long-term work with stratification material without losses attention. Fit too to numeration by other cycle (iterative) act. |
|
Eur 10.6,- net of VAT |
|
Mechanical pieces counter for layers counting on cutting bar
| This counter is ideal for use with cloth cutting machine. Counter for count up with 6 mm height 5 numbers for counting from 0 to 99999 pieces. Special modification with circular roller. | | Tech. specification: Type: mechanical counter - special |
Model: for layers counting
Display: 5 (from 0 to 99999 pc.) |
Numbers height: 6 mm |
Note: count up +1, reset button
Color: black / silver |
Weight: 195 gr.
At store are about 15 pc. | | Detail: Special mechanical counter with count up function and Reset button for counting on our cutting bar. |
|
Eur 36.7,- net of VAT |
|
Electronic digital counter ROB 100 - pieces counter with summing up (module)
| Basic digital counter ROB version 100 with 5 digit red 10 mm height LED for counting from 1 to 99 999 pc. Is fit for summing up pieces. Made in Czech republic. | | Tech. specification: Type: ROB |
Version: 100 (special) |
Basic function: summing up (impulse) |
Display: 5 x 8-digit LED with 10 mm number height |
Type od display: red light numbers |
Max. range: from 1 to 99 999 (total sum)
Inputs: 2 x input control by source potential (DIN1 and DIN2) |
Input type: 1 impulse is +1 to Total sum, 1 impulse is Reset |
Input limitation: min. 10 ms, max. 100hz |
Outputs: without outputs
Control panel: Reset
Potential: only external (isn't in supplies) |
Potential voltage: 12-24 V DC |
Max. input amperage: 50mA |
Protectio class: IP22 (only module) |
Temperature: -20 až +40 °C |
Relative humidity: 90% (without condensation)
Buid-up proportions (hole): 66 x 32 mm |
Weight: 100 gr. |
Proportions: 82 x 36 x 72 mm | | | Detail: Very high quality counter (pieces counter with summin up function) ROB with five 8-digit LED with red colour light (super readable). Counter ROB v. 100 is module fit for other montage to electro box or switch board. Counter has case from plastic with proportions 72 x 36 x 82 mm. Module has terminal board (voltage source input, inputs and outputs) for cable connection to 1.5 mm2. From front side is special plastic film with our print and with one microswitch for counter Reset. Counters series ROB hes not integral accu and is require power source with 12 24 V DC.Version 100 using: Version 100 is usable for standard products counting etc. |
|
Eur 84.8,- net of VAT |
|
Electronic digital counter ROB 110 - pc. counter with summing down, repeat mode av. (module)
| Digital counter ROB version 110 with 5 digit red 10 mm height LED for counting from 1 to 99 999 pc. Is fit for summing down pieces with repeat mode (available). Made in Czech republic. | | Tech. specification: Type: ROB |
Version: 110 (count down wit cycle mode - available) |
Basic function: cycle counter, scaler (impulse) |
Display: 5 x 8-digit LED with 10 mm number height |
Type od display: red light numbers |
Max. range: from 1 to 99 999 (total sum)
Inputs: 3 x input control by source potential (DIN1, DIN2, AIN1) |
Input DIN1: 1 impulse is -1 of Set sum |
Input DIN2: Counting start, cyckle start - on panel too |
Input AIN1: Reset - on panel too |
Input limitation: min. 10 ms, max. 100hz |
Outputs: 2 x output (transistor - max. 750mA, with source potential) |
Output 01: active when is Start cycle active |
Output 02: cyclic, impulse with time limitation after count to 0 value
Control panel: Menu, Set, Stop, Start
Potential: only external (isn't in supplies) |
Potential voltage: 12-24 V DC |
Max. input amperage: 50mA |
Protectio class: IP22 (only module) |
Temperature: -20 až +40 °C |
Relative humidity: 90% (without condensation)
Buid-up proportions (hole): 66 x 32 mm |
Weight: 100 gr. |
Proportions: 82 x 36 x 72 mm | | | Detail: Very high quality counter (pieces or cycles counter) ROB with five 8-digit LED with red colour light (super readable). Counter ROB v. 110 is module fit for other montage to electro box or switch board. Counter has case from plastic with proportions 72 x 36 x 82 mm. Module has terminal board (voltage source input, inputs and outputs) for cable connection to 1.5 mm2. From front side is special plastic film with our print and with microswitches for counter setting. Microbuttons function on this panel are different according to version. Counters series ROB hes not integral accu and is require power source with 12 24 V DC.Version 110 using: Version 110 is usable for products testing on continual production or for products counting when fill in to box etc. |
|
Eur 89.2,- net of VAT |
|
Electronic digital counter ROB 210 - longitude prog. counter with summing down (module)
| Digital counter ROB version 210 is fit for longitude counting with Incremental encoder. Count down, count up etc. Is good for many pieces counting with repeat function or display length only. Made in Czech republic. | | Tech. specification: Type: ROB |
Version: 210 (special) |
Basic function: comparative impulses counting (from IRC) with repet function |
Display: 5 x 8-digit LED with 10 mm number height |
Type od display: red light numbers |
Max. range: from 1 to 99 999 (total sum)
Inputs: 3 x input control by source potential (AIN1, DIN1 and DIN2) |
Input AIN1: configurable (Ex. Start of cycle or Reset |
Input DIN1: A (summing up) of IRC |
Input DIN1: B (summing down) of IRC |
Input limitation: max. frequency 5kHz (5000 imp. / sec.) |
Outputs: 2 x output (transistor - max. 750mA, with source potential) |
Output 01: active when is Start cycle active |
Output 02: cyclic, impulse with time limitation after count to 0 value
Control panel: Menu, Set, Stop, Start
Potential: only external (isn't in supplies) |
Potential voltage: 12-24 V DC |
Max. input amperage: 50mA |
Protectio class: IP22 (only module) |
Temperature: -20 až +40 °C |
Relative humidity: 90% (without condensation)
Buid-up proportions (hole): 66 x 32 mm |
Weight: 100 gr. |
Proportions: 82 x 36 x 72 mm | | | Detail: Very high quality longitude counter (longitude impulses from IRC incremental encoder) ROB with programmable function (menu) and with five 8-digit LED (red colour light super readable). Counter ROB v. 210 is module fit for other montage to electro box or switch board. Counter has case from plastic with proportions 72 x 36 x 82 mm. Module has terminal board (voltage source input, inputs and outputs) for cable connection to 1.5 mm2. From front side is special plastic film with our print and with microswitches for counter control and other function. Microbuttons function on this panel are different according to version (ROB 210 has Menu, Set, Stop and Start button on panel). Counters series ROB hes not integral accu and is require power source with 12 24 V DC.Version 200 using: Version 210 is usable for repeating material measure with same longitude. ROB 210 with our measure wheel has hight accuracy (5 kHz). |
|
Eur 108.2,- net of VAT |
|
Pieces counter ROB ZI for farmers with induction sensor and ROB 100 (set / kit)
| Complete kit for pieces counting, counting packages etc. Mounted yourself. This kit using inductive sensors (included), which add +1 piece to display after covering the metal. The number of pieces is displayed on the clear display inside the cab (Reset the number from driver's seat). Easy installation, high durability and comfort. This is a kit ROB ZI. | | Tech. specification: Type of set: kit |
Design: industrial |
Power supply: DC 12 - 24V |
Conter unit: ROB 100 for pieces counting +1 with Reset |
Indctive sensor: dia. 8 mm, range max. 8 mm (PNP, impulse after crossing the metal) |
| | Detail: Function description: with metal inductive sensors (sensor captures the moving metal parts usually the arm feeders etc..) Will be add one piece on display (mounted in the cab). Reset by button on units or by external button. |
Custom implementation: counter ROB 100 supply voltage DC 12 24V, is mounted in the cab. You can use 1A fuse (fuse holder and fuse purchased at car parts shop). This power supply would be also used for inductive sensor. The sensor is equipped with cable (length 2 m). One pair of resilient mounting boxes with IP56. |
Set ROB ZI include: |
ROB counter 100 for installation in the dashboard or boxes
Signal cable for divorce from the sensor to the counter 10 meters |
M12 inductive sensor with a range of max. 8 mm
2 x resistant plastic box
1 + 1 XLR connector for connecting the sensor cable to counters cable
3 x plastic cable grommet
Owners manual (counter cz) + diagram |
|
Eur 154.8,- net of VAT |
|
Electronic digital counter ROB 123 - pieces counter with special control function (module)
| High quality digital counter ROB version 123 with 5 digit red 10 mm height LED for counting from 1 to 99 999 pc. is fit for testing or statistic. You can set value and when is this value counting, output with siren or other sigalization closure. This value is cyclic and scaler count to total sum from now on. Made in Czech republic. | | Tech. specification: Type: ROB |
Version: 123 (special) |
Basic function: cycle counter, scaler (impulse) |
Display: 5 x 8-digit LED with 10 mm number height |
Type od display: red light numbers |
Max. range: from 1 to 99 999 (total sum)
Inputs: 1 x input control by source potential (DIN1) |
Input type: 1 impulse is +1 to Total sum |
Input limitation: min. 10 ms, max. 100hz |
Outputs: 1 x output (transistor - max. 750mA, with source potential) |
Output type: cyclic, impulse with time limitation after count to setting value
Control panel: Reset with joint function for setting value save, + a - button with joint function for setting value from 1 to 99999 or for menu enter
Potential: only external (isn't in supplies) |
Potential voltage: 12-24 V DC |
Max. input amperage: 50mA |
Protectio class: IP22 (only module) |
Temperature: -20 až +40 °C |
Relative humidity: 90% (without condensation)
Buid-up proportions (hole): 66 x 32 mm |
Weight: 100 gr. |
Proportions: 82 x 36 x 72 mm | | | Detail: Very high quality counter (pieces or cycles counter) ROB with five 8-digit LED with red colour light (super readable). Counter ROB v. 123 is module fit for other montage to electro box or switch board. Counter has case from plastic with proportions 72 x 36 x 82 mm. Module has terminal board (voltage source input, inputs and outputs) for cable connection to 1.5 mm2. From front side is special plastic film with our print and with microswitch for counter setting. Microbuttons function on this panel are different according to version. Counters series ROB hes not integral accu and is require power source with 12 24 V DC.Version 123 using: Version 123 is usable for products testing on continual production or for water testing in the course of PET bottle filling for example. |
|
Eur 99.6,- net of VAT |
|
Electronic digital counter modul IVO ISI 30 (counter modul)
| First-rate digital modul, scaler IVO series ISI 30. Eight digit display, power supply by the lithium battery (8 years). | | Tech. specification: Type: ISI 30.013 |
Display: 8 places LCD |
Type displays: digit |
Proportions: 45 x 22 x 47 mm |
Overall dimension: 48 x 24 x 53.5 mm |
Other: RESET button |
Input tension: potential |
In tension potential: 10 - 260 V AC/DC |
Power supply scaler: Lithium storage battery |
Service life storage battery: 8 flight (according to producer) | | | Detail: Scaler be invested with reset buttons on panel. Be calculated for build into mounting box or holder. |
|
Eur 89.2,- net of VAT |
|
Digital counter ROB 1101 - complete, pieces counter with special button
| Complete digital counter with big industrial button for count up and Reset button on main panel (with delay function). There are five 8 digit LED for value displaying to 99999 pieces. As counter is used ROB 100. Power supply voltage is AC 230 V (AC adapter 230 V / 12 V DC is included). | | Tech. specification: Counter module: ROB 100 |
Options: count up pieces, reset (data loss prevention), power supply AC 230V.
Display unit: 5 digit 8 LED with height of numbers 10 mm (red) | Button Reset: on the body (panel) of display unit |
Button for count up pieces: industrial button (diameter 40 mm, running 5 mm, green color) | Power Supply: AC 230 V / 12 V DC (included)
Overall dimensions: 115 x 115 x 115 mm (without power adapter). |
Weight of assembled units: 310 gr. |
Total weight: 450 gr. (incl. sources) | | | Detail: Counter ROB 1101 is ergonomic fully adjustable counter (power conector position change turning the upper cover) suitable for basic count up pieces.One press of green button be add one piece on the screen. Button with industry contacts with dia. 40 mm (do not miss the strike).Reset button for reset the display / numerical value is placed directly on the display module. Special delay function for eliminate accidental pressing reset.Counter is equipped with an internal memory which memorizes the last counting value.For displaying are used 10 mm high 8 digit LED with illuminated numerals. Max. resolution is 99,999 pieces. Counter is designed for basic counting without compromise. |
|
Eur 125.5,- net of VAT |
|
Double counter ROB special (cusstom made conter with PLC)
| Custom made conter for two rows of product counting. PLC unit with display and special software. Counter memory (power failure), 2x input for optical sensors, delay setting of the encoder pulses. To order everything ... | | Tech. specification: Power: AC 230V, 50Hz, 2-12W |
Sensors: 2 x PNP optical sensor |
PLCS Unit: 8x input, 4x output PNP, display HMI with keyboard |
Software: according to your specification | | | Detail: Advantages of this solution: |
Possibility of additional programming many more features |
Always tailored solutions for even complex operations feasible | |
|
on demand |
|
Digital counter piece with automatic switcher
| Digital counter appropriate for numeration spanning strata matters with switch. | | Tech. specification: Input potential from accumulator, battery or from machinery potential. | | Detail: Thanks special ergonomically hereof abacuses it is possible reach for long-term work with stratification material without losses attention. Fit too to numeration by other cycle (iterative) act. |
|
on demand |
|
Counter for cutting guide rail
| Possibility nether world digit. Automatic numeration loading when arrive with cutting machine. | | Tech. specification: 6 number LCD display |
Altitude digit 14 mm |
Power supply: 2 x AA battery 1.5V |
Input: 10 mA |
1 x reset button |
| | Detail: Made bespoke. This mock-up with mechanical buttons.Automatical calculate when arrive with cutting machine. |
|
on demand |
|
Lid, plate cover for numeration piece
| Serve for numeration piece at assembling to the box or transportation. Possibility nether world digit. Setting statement piece, automatic numeration loading. Possibility acoustic signalling. | | Tech. specification: 6 number LCD display |
Altitude digit 14 mm |
Power supply: 2 x AA battery 1.5V |
Input: 10 mA |
Possibility below-lightening (only model 340) |
2 x reset button |
Possibility setting prestress lid |
Proportions scaler: 72x35x16 |
Possibility signalling to the-numeration |
Possibility statement piece |
Proportions lid: according to specifications |
Material lid: polycarbonate |
| | Detail: Made bespoke. Easy loading produce to the box.
Possibility variant with optical sense organ.
This mock-up with mechanical buttons. Burst produce foldaway lid, which crediting on display number this way burst piece.
Ergonimical fulfilment, this is model 240 (without light). |
|
from Eur 264.8,- net of VAT |
|
Length measuring wheel OKIII - 200
| The measuring wheel OK - III is used for measuring the lengths of flat or strip materials. The circumference of this wheel is 200 mm and it is always coated with white rubber. It works in cooperation not only with the LUCA unit, LUCA 2 and LUCA T. | | Tech. specification: Dimensions of the cylindrical measuring surface: O = 200 mm |
Measuring wheel surface diameter: 63.6±0.05mm |
Overall width: 35 mm |
Width of the working surface: 30 mm |
Diameter of the steel ring: 63.2 mm |
Diameter across needles: 64.2mm |
Width of the iron ring: 8 mm |
Length of the standard support arm: 160 mm |
Diameter of the tube for attaching the wheel: 28 mm |
Length of standard connection cable (LIYCY 4x0.25): 3000 mm |
Total weight (incl. carrying arm): 520 gr. |
Weight of the measuring wheel acting on the measured substance: 310 gr. |
Max. circumferential traction force required to turn gauge. wheel: 0.05N |
Recommended supply voltage: DC (ss) 15 - 30 V |
Current consumption (max.): 50 mA |
Output signal: according to resolution |
worse or equal to 1 mm (1-100 mm): 2xNPN-open collector (sink) |
better than 1mm (1mm, 0.5mm etc.): 2xPushPull (sink NPN/source PNP) |
Resolution unit: edge of output pulses |
Alternation of input pulses: 1:1 ± 10% |
Phase shift of pulses: 90° el. ± 20% |
Resolution of measurement length: according to design |
Recommended maximum measurement speed: 2 m/s |
Maximum measuring speed: 4.5 m/s | | Detail: Wheels are supplied with accuracy: |
100 mm (OKIII-200x/1z 1 tooth per turn) |
10 mm (OKIII-200x 10 teeth per turn) |
1 mm (OKIII-200x/50z 50 teeth per turn) |
or as desired to orderCustom number of pulses per 1 turn of the wheel are 32, 64-8192, 40, 80, 100, 162, 200, 320, 400, 500, 800, 1000, 2000<
Wheels with an accuracy of 100 1 mm are made with an optoelectric design of the sensor and their output is therefore NPN (sink). In the event that you need to connect the NPN wheel to a counter other than LUCA (NPN), e.g. to a regular PLC (PNP), you will need to use resistors for each of the channels (Pull up connection). |
Wheels with a higher accuracy than 1 mm (0.5 mm, on request to order) are already equipped with a magneto-electric sensor and can therefore be connected to NPN (sink) and PNP (source) circuits without the need for further changes.
|
|
| Type: | | OKIII 200 1z - accuracy 100 mm | 14008006/0 | Eur 255.1,- | | OKIII 200 - accuracy 10 mm | 14008006/1 | Eur 260.2,- | | OKIII 200 50z - accuracy 1 mm | 14008006/2 | Eur 316.1,- | | OKIII 200 - custom accuracy | | Eur 347,- | | + suspension arm for OKIII 200 | | Eur 19.8,- | | + for each + 1m cable length for OKIII 200 | | Eur 2.5,- |
|
from Eur 255.1,- net of VAT |
|
Length measuring wheel OKIII - 200M - metrological ČMI
| ype OKIII - 200M can be used as a specified gauge after CMI verification. The measuring wheel OK - III M is used for measuring the lengths of flat or strip materials. The circumference of this wheel is 200 mm and it is always coated with white rubber. It works in cooperation not only with the LUCA unit, LUCA 2 and LUCA T. When used with the LUCA-T (M) unit, it is possible to perform metrological verification and then use the assembly for customer measurements. | | Tech. specification: Type M enables metrological verification. |
Dimensions of the cylindrical measuring surface: O = 200 mm |
Measuring wheel surface diameter: 63.6±0.05mm |
Overall width: 35 mm |
Width of the working surface: 30 mm |
Diameter of the steel ring: 63.2 mm |
Diameter across needles: 64.2mm |
Width of the iron ring: 8 mm |
Length of the standard support arm: 160 mm |
Diameter of the tube for attaching the wheel: 28 mm |
Length of standard connection cable (LIYCY 4x0.25): 3000 mm |
Total weight (incl. carrying arm): 520 gr. |
Weight of the measuring wheel acting on the measured substance: 310 gr. |
Max. circumferential traction force required to turn gauge. wheel: 0.05N |
Recommended supply voltage: DC (ss) 15 - 30 V |
Current consumption (max.): 50 mA |
Output signal: according to resolution |
worse or equal to 1 mm (1-100 mm): 2xNPN-open collector (sink) |
better than 1mm (1mm, 0.5mm etc.): 2xPushPull (sink NPN/source PNP) |
Resolution unit: edge of output pulses |
Alternation of input pulses: 1:1 ± 10% |
Phase shift of pulses: 90° el. ± 20% |
Resolution of measurement length: according to design |
Recommended maximum measurement speed: 2 m/s |
Maximum measuring speed: 4.5 m/s | | Detail: Type M is ready for possible ČMI verification as a specified gauge. Compared to the basic OKIII model, the M also includes an adjustment for its sealing.
Wheels are supplied with accuracy: |
100 mm (OKIII-200M/1z 1 tooth per turn) |
10 mm (OKIII-200M 10 teeth per turn) |
1 mm (OKIII-200M/50z 50 teeth per turn) |
or as desired to orderCustom number of pulses per 1 turn of the wheel are 32, 64-8192, 40, 80, 100, 162, 200, 320, 400, 500, 800, 1000, 2000<
Wheels with an accuracy of 100 1 mm are made with an optoelectric design of the sensor and their output is therefore NPN (sink). In the event that you need to connect the NPN wheel to a counter other than LUCA (NPN), e.g. to a regular PLC (PNP), you will need to use resistors for each of the channels (Pull up connection). |
Wheels with a higher accuracy than 1 mm (0.5 mm, on request to order) are already equipped with a magneto-electric sensor and can therefore be connected to NPN (sink) and PNP (source) circuits without the need for further changes.
|
|
| Type: | | OKIII 200 M 1z - accuracy 100 mm | | Eur 370.8,- | | OKIII 200 M - accuracy 10 mm | | Eur 375,- | | OKIII 200 M 5z - accuracy 1 mm | | Eur 417.4,- | | OKIII 200 M - custom accuracy | | Eur 446.2,- | | + suspension arm for OKIII 200 | | Eur 19.8,- | | + for each + 1m cable length for OKIII 200 | | Eur 2.5,- |
|
from Eur 370.8,- net of VAT |
|
Length measuring wheel OKIII - 400
| The measuring wheel OK - III is a device for measuring the lengths of flat or strip materials. The circumference of this wheel is 400 mm. The wheel can be with a white rubber cover or without a stainless steel cover with radling in the case of the OC type. It works in cooperation not only with the LUCA unit, LUCA 2 and LUCA T. | | Tech. specification: Dimensions of the cylindrical measuring surface: O = 400 mm |
Measuring wheel surface diameter: 126.8 ±0.1mm |
Overall width: 42 mm |
Width of the working surface: 30 mm |
Length of the standard support arm: 160 mm |
Diameter of the tube for attaching the wheel: 28 mm |
Length of standard connection cable (LIYCY 4x0.25): 3000 mm |
Total weight (incl. carrying arm): 720 gr. |
Weight of the measuring wheel acting on the measured substance: 510 gr. |
Max. circumferential traction force required to turn gauge. wheel: 0.1N |
Recommended supply voltage: DC (ss) 15 - 30 V |
Current consumption (max.): 50 mA |
Output signal: according to resolution |
worse or equal to 2 mm (2-100 mm): 2xNPN-open collector (sink) |
better than 2mm (1mm, 0.5mm etc.): 2xPushPull (sink NPN/source PNP) |
Resolution unit: edge of output pulses |
Alternation of input pulses: 1:1 ± 10% |
Phase shift of pulses: 90° el. ± 20% |
Resolution of measurement length: according to design |
Recommended maximum measurement speed: 3 m/s |
Maximum measuring speed: 4.5 m/s | | Detail: Wheels are supplied with accuracy: |
100 mm (OKIII-400x/1z 1 tooth per turn) |
10 mm (OKIII-400x 10 teeth per turn) |
2 mm (OKIII-400x/50z 50 teeth per turn) |
1 mm (OKIII-400x/100z 100 teeth per turn) |
or upon request to orderThe number of impulses per 1 rotation of the wheel is 32, 64-8192, 40, 80, 100, 162, 200, 320, 400, 500, 800, 1000, 2000
Measuring wheels OKIII-400, i.e. with a circumference of 400 mm, are produced not only with a basic coating of the wheel with white rubber, Type OC is available with a wheel made of stainless steel with a diagonal wheel (on request, a transverse wheel can also be made). | Sealable wheel with marked M, which can be used in a set as a specified, metrologically verifiable gauge, is offered as a separate product.
The wheel is housed in a pair of ball bearings. In the standard version, the axis of the wheel is attached to a hinged metal arm 160 mm long. An electronic evaluation circuit is built into the measuring wheel, which generates two phase-shifted sequences of pulses when the wheel rotates. From them, the measured distance and direction of rotation of the wheel can be evaluated. In the standard version, one pulse edge corresponds to 10 mm (wheel without resolution marking). Different designs can be supplied (see above). |
|
| Type: | | OKIII 400 1z - accuracy 100 mm | | Eur 264.8,- | | OKIII 400 - accuracy 10 mm | | Eur 269.9,- | | OKIII 400 50z - accuracy 2 mm | 14008006/5 | Eur 311,- | | OKIII 400 100z - accuracy 1 mm | 14008006/6 | Eur 420.8,- | | OKIII 400 - custom accuracy | | Eur 461.1,- | | OKIII 400 OC - accuracy 100 mm | | Eur 269.5,- | | OKIII 400 OC - accuracy 10 mm | | Eur 274.6,- | | OKIII 400 OC - accuracy 2 mm | | Eur 316.1,- | | OKIII 400 OC - accuracy 1 mm | | Eur 425.4,- | | OKIII 400 OC - custom accuracy | | Eur 465.7,- | | + suspension arm for OKIII 400 | | Eur 19.8,- | | + for each + 1m cable length for OKIII 400 | | Eur 2.5,- |
|
from Eur 264.8,- net of VAT |
|
Measuring wheel OKIII - 400M - metrologically verifiable CMI
| Type OKIII - 400M can be used as a specified measuring device after CMI verification. The measuring wheel OK - III M is used for measuring the lengths of flat or strip materials. The circumference of this wheel is 400 mm. The wheel can be with a white rubber cover or without a stainless steel cover with radling in the case of the OC type. It works in cooperation not only with the LUCA unit, LUCA 2 and LUCA T. When used with the LUCA-T (M) unit, it is possible to perform metrological verification and then use the assembly for customer measurements. | | Tech. specification: Type M enables metrological verification. |
Dimensions of the cylindrical measuring surface: O = 400 mm |
Measuring wheel surface diameter: 126.8 ±0.1mm |
Overall width: 42 mm |
Width of the working surface: 30 mm |
Length of the standard support arm: 160 mm |
Diameter of the tube for attaching the wheel: 28 mm |
Length of standard connection cable (LIYCY 4x0.25): 3000 mm |
Total weight (incl. carrying arm): 720 gr. |
Weight of the measuring wheel acting on the measured substance: 510 gr. |
Max. circumferential traction force required to turn gauge. wheel: 0.1N |
Recommended supply voltage: DC (ss) 15 - 30 V |
Current consumption (max.): 50 mA |
Output signal: according to resolution |
worse or equal to 2 mm (2-100 mm): 2xNPN-open collector (sink) |
better than 2mm (1mm, 0.5mm etc.): 2xPushPull (sink NPN/source PNP) |
Resolution unit: edge of output pulses |
Alternation of input pulses: 1:1 ± 10% |
Phase shift of pulses: 90° el. ± 20% |
Resolution of measurement length: according to design |
Recommended maximum measurement speed: 3 m/s |
Maximum measuring speed: 4.5 m/s | | Detail: Wheels are supplied with accuracy: |
100 mm (OKIII-400x/1z 1 tooth per turn) |
10 mm (OKIII-400x 10 teeth per turn) |
2 mm (OKIII-400x/50z 50 teeth per turn) |
1 mm (OKIII-400x/100z 100 teeth per turn) |
or upon request to orderThe number of impulses per 1 rotation of the wheel is 32, 64-8192, 40, 80, 100, 162, 200, 320, 400, 500, 800, 1000, 2000
Measuring wheels OKIII-400, i.e. with a circumference of 400 mm, are produced not only with a basic coating of the wheel with white rubber. Type OC is available with a stainless steel wheel with diagonal radiating (transverse radiating can also be made on request). | The sealable wheel marked M can be used in the assembly as a fixed, metrologically verifiable gauge. The basic model without verification is offered as a separate product.
The wheel is housed in a pair of ball bearings. In the standard version, the axis of the wheel is attached to a hinged metal arm 160 mm long. An electronic evaluation circuit is built into the measuring wheel, which generates two phase-shifted sequences of pulses when the wheel rotates. From them, the measured distance and direction of rotation of the wheel can be evaluated. In the standard version, one pulse edge corresponds to 10 mm (wheel without resolution marking). Different designs can be supplied (see above).
The measuring wheel OKIII-400 with this circuit is produced in the following versions: |
OK III 400 wheel surface coated with white rubber basic version offered as a separate product |
OK III 400 M metrological (sealable), wheel surface coated with white rubber |
OK III 400 OC stainless steel wheel with a diagonally grooved surface offered as a separate product |
OK III 400 M OC metrological gauge (sealable), stainless steel wheel with diagonally grooved surface
| |
|
| Type: | | OKIII 400 M 1z - accuracy 100 mm | | Eur 383.9,- | | OKIII 400 M - accuracy 10 mm | 14008006/4 | Eur 388.6,- | | OKIII 400 M 50z - accuracy 2 mm | | Eur 425.8,- | | OKIII 400 M 100z - accuracy 1 mm | | Eur 539.4,- | | OKIII 400 M - custom accuracy | | Eur 547.9,- | | OKIII 400 M OC 1z - accuracy 100 mm | | Eur 388.6,- | | OKIII 400 M OC - accuracy 10 mm | | Eur 393.2,- | | OKIII 400 M OC 50z - accuracy 2 mm | | Eur 430.5,- | | OKIII 400 M OC 100z - accuracy 1 mm | | Eur 544.1,- | | OKIII 400 M OC - custom accuracy | | Eur 552.5,- | | + suspension arm for OKIII 400M | | Eur 19.8,- | | + for each + 1m cable length for OKIII 400M | | Eur 2.5,- |
|
from Eur 383.9,- net of VAT |
|
Electronic counter LUCA T (new type with touch display)
| New electronic counter LUCA-T with touch display is destined to count the impulses coming from the non-contact or contact sensors. It can distinguish the direction (attribution, subtraction). Read values are counted in two independent units and you can swich displaying of these on the counter display. One of the unit can be set by program for example as the velocity meter. | | Tech. specification: Power supply connection: 230 V, 50 Hz |
Counter power: 4.5 VA |
Display & Control: 3.5 inch LCD touch panel |
Reset button: external or panel |
View measuring range: 0.001 - 99999.99 |
Adjustable counting constant: 0,001 - 9,999 |
Maximum input frequency: 2200 Hz at 1: 1 duty cycle (bi-directional reading)
Inputs: 2 counting, 2 resetting |
Level L input. UL pulses: 0 V - 1 V |
Level H input. pulses UH: 4 V - 24 V |
Zeroing voltage: 4 V - 24 V |
Proud entry. pulses: min. 4 mA |
Proud reset: min 4 mA |
Number of readers: 3 |
Preset 1 output: 1 x changeover contacts |
2nd preselection output: 1 x make contact, 110 V ADC, max. 1 A |
Output pulse length: adjustable |
Counter status retention period: inf. 10 years |
Electrical protection: IP 66 |
Counter dimensions: approx. 66 x 92 x 120 mm |
Weight: 440 g |
| | Detail: The whole device is placed in a plastic box with IP 66 protection. As standard, the counter is equipped with 3 bushings for the input and output cables. The instrument is equipped with a 3.5-inch touch panel, which is used to display both measured and input values and the operator can enter the values (eg desired presets). For counting pulses, the counter is equipped with two counting inputs F1 and F2 connected to the terminal board of the instrument. In addition, +24 V voltage is applied to the terminal board for supplying sensors, inputs for external reset buttons and outputs. The counter can be equipped with two relay outputs. | | The function and operation of the counter is determined by its parameters. These can be changed by factory setting and program settings (number of presets, number and parameters of inputs and outputs, resetting method, supply voltage, 4th bushing) or directly by the user, by setting SETUP (one-way or two-way counting) The second output, the switching time of the preselection relay, the most used is presetting by the operator. | In the standard configuration, the LUCA-T is set to three counting units with two 0.4s long presets. , the second whole units. |
|
|
Eur 604.1,- net of VAT |
|
Electronic counter LUCA T (new type with touch display) - metrologic ČMI
| New electronic counter LUCA-T with touch display is destined to count the impulses coming from the non-contact or contact sensors. It can distinguish the direction (attribution, subtraction). Read values are counted in two independent units and you can swich displaying of these on the counter display. One of the unit can be set by program for example as the velocity meter. | | Tech. specification: Power supply connection: 230 V, 50 Hz |
Counter power: 4.5 VA |
Display & Control: 3.5 inch LCD touch panel |
Reset button: external or panel |
View measuring range: 0.001 - 99999.99 |
Adjustable counting constant: 0,001 - 9,999 |
Maximum input frequency: 2200 Hz at 1: 1 duty cycle (bi-directional reading)
Inputs: 2 counting, 2 resetting |
Level L input. UL pulses: 0 V - 1 V |
Level H input. pulses UH: 4 V - 24 V |
Zeroing voltage: 4 V - 24 V |
Proud entry. pulses: min. 4 mA |
Proud reset: min 4 mA |
Number of readers: 3 |
Preset 1 output: 1 x changeover contacts |
2nd preselection output: 1 x make contact, 110 V ADC, max. 1 A |
Output pulse length: adjustable |
Counter status retention period: inf. 10 years |
Electrical protection: IP 66 |
Counter dimensions: approx. 66 x 92 x 120 mm |
Weight: 440 g |
| | Detail: The whole device is placed in a plastic box with IP 66 protection. As standard, the counter is equipped with 3 bushings for the input and output cables. The instrument is equipped with a 3.5-inch touch panel, which is used to display both measured and input values and the operator can enter the values (eg desired presets). For counting pulses, the counter is equipped with two counting inputs F1 and F2 connected to the terminal board of the instrument. In addition, +24 V voltage is applied to the terminal board for supplying sensors, inputs for external reset buttons and outputs. The counter can be equipped with two relay outputs. | | The function and operation of the counter is determined by its parameters. These can be changed by factory setting and program settings (number of presets, number and parameters of inputs and outputs, resetting method, supply voltage, 4th bushing) or directly by the user, by setting SETUP (one-way or two-way counting) The second output, the switching time of the preselection relay, the most used is presetting by the operator. | In the standard configuration, the LUCA-T is set to three counting units with two 0.4s long presets. , the second whole units. |
|
|
Eur 695.6,- net of VAT |
|
Power source DC 12V ( 230V AC / 12V DC, 2A ) not only for counters ROB
| This small power source with output voltage 12 V DC is fit for counters ROB. Adapter has cable 1,5m long with conector. Output power about 24W is more then good for work with our counters, scalers. Power source ROB has sufficient power for other inputs power (switches, optical sensor etc.) or some outputs as relays etc. | | Tech. specification: Usability: universal, for eletronical counters ROB |
Input voltage: AC 230V, 50Hz (100 - 240 V) |
Output voltage: DC 12V (12.4V no-load) |
Max. amperage: 2.0 A |
Protection class: II
Adaptor type: straight conected, interior use only |
Adaptor case: plastic |
Color: black |
Output cable longitude: 1.5 m
End of cable: connector 5.5 x 2.5mm
Proportions (with pins): 77 × 33 × 49 mm |
Weight: 106 gr. | | | Detail: Small source look like adaptor for basic voltage AC 230 V, 50 Hz. Output cable with conector and longitude 1.5 m for all using. Stabilized output voltage 12 DC is good for our counters ROB. Power source has small proportions and amperage to 2000 mA. No-load voltage is 12.4 V. |
|
Eur 8.4,- net of VAT |
|
Power connector 2.5 or 2.1 for mounting in box - ideal for 12V DC power supply ROB (two types)
| DC power plug 5.5 mm / 2.5 mm. Socket with pin Ø 2.5 mm and assembly into the hole (on the panel) in axial design of the center pin. Metal high quality connector. | | Tech. specification: Usability: suitable for use with a DC 12 V power source ROB |
Max. terminal voltage: DC 30 V |
Max. current: 3 A |
Hole diameter: 5.5 mm |
Pin diameter: 2.5 mm or 2.1 mm
Design: metal and plastic (non-conductive) parts, soldering pads |
Color: metal
Mounting hole: dia. 11 mm |
Proportions (max.): 26.3 x 16.2 x 16.2 mm |
Weight: 7.55 gr. resp. 7.95 gr. | | | Detail: Female connector for embedding in box is particularly suitable for use with power supply, adapter, which we offer as range of accessories for ROB counters.Wire connection must be made by soldering. Our source use positive supply voltage 12V DC in the middle part. On the middle pins will be positive voltage too. The central solder pad of connector is switching (NC). If you are not concerned about the use of NO / NC mode enables tabs 2 and 3 to connect a switch thus deactivate (see Figure 2 in the other photo product).Please check first involvement for polarity reversing problem. |
|
| Types: | | Power connector 2.5 mm | | Eur 1,- | | Power connector 2.1 mm | | Eur 1,- |
|
from Eur 1,- net of VAT |
|
Signal connector DIN 5 SE-Z for mounting into box - for incremental counter ROB and wheel
| Signal DIN 5 plug for quick connection between incremental measure wheel (encoder) and incremental counters ROB. Metal high quality connector. | | Tech. specification: Usability: suitable for use with a incremental wheel and counters ROB
Performance: steel with plastic (dieletric) parts, soldering pads |
Number of pins: 5 (total 6) |
Connector fixation: by bolts, screws, rivets (hole 3.5 mm, spacing of holes 22 mm) |
Color: black / metal
Mounting hole: dia. 16 mm |
Proportions: 28 x 19 x 21 mm |
Weight: 4.7 gr. | | | Detail: Female connector for embedding in box is particularly suitable for use with incremental measure wheel or for incremental ROB counters.This DIN 5 pin connector is standardly used for audio line level input/output or keyboard. Do not plug this accessories. |
|
Eur 0.5,- net of VAT |
|
Signal connector DIN 5 S-V for mounting to cable of icremental measure wheel K (male)
| Male of signal DIN 5 plug for quick connection between incremental measure wheel (encoder) and incremental counters ROB. This connector is fit for cable montage. Metal high quality connector. | | Tech. specification: Usability: suitable for use with incremental measure wheel (encoder) ROB
Performance: steel with plastic (dieletric) parts, soldering pads |
Number of pins: 5 (total 6) |
Color: black / metal
Montage: to cable |
Proportions: 58 x 17 x 16 mm |
Weight: 8 gr. | | | Detail: Male connector for install on cable is particularly suitable for use with incremental measure wheel or for incremental ROB counters.This DIN 5 pin connector is standardly used for audio line level input/output or keyboard. Do not plug this accessories. |
|
Eur 0.5,- net of VAT |
|
Signal connector DIN 5 SE-V for extension cable of icremental measure wheel K (female)
| Female of signal DIN 5 plug for extension cable between incremental measure wheel (encoder) and incremental counters ROB. This connector is fit for cable montage. For extension cable you need counterpart. | | Tech. specification: Usability: for extension cable
Performance: steel with plastic (dieletric) parts, soldering pads |
Number of pins: 5 (total 6) |
Color: black / metal
Montage: to cable |
Proportions: 57 x 16 x 16 mm |
Weight: 8 gr. | | | Detail: Female connector for install on cable is particularly suitable for making the extension cable.This DIN 5 pin connector is standardly used for audio line level input/output or keyboard. Do not plug this accessories. |
|
Eur 0.5,- net of VAT |
|
Signal connector XLR Canon 3P for mounting into box
| Signal XLR 3P plug for quick connection between induction, difuse sensors and pieces counters ROB 100 or ROB 110. Metal high quality connector. | | Tech. specification: Usability: suitable for use with a digital sensor and counters ROB 100 or 110
Performance: steel with plastic (dieletric) parts, soldering pads |
Number of pins: 3 (total 4) |
Connector fixation: by bolts, screws, rivets (hole 3.5 mm, spacing of holes 27 mm) |
Color: metal
Mounting hole: dia. 19 mm |
Proportions: 36 x 22 x 25 mm |
Weight: 17 gr. | | | Detail: Female connector for embedding in box is particularly suitable for use with digital sensors and ROB counters.This XLR 3 pin connector is standardly used for audio line level input/output. |
|
Eur 1.4,- net of VAT |
|
Signal connector XLR Canon 3P - for mounting to cable (male)
| Male of signal XLR 3P plug for quick connection between induction, difuse sensors and counters ROB 100 and ROB 110. This connector is fit for cable montage. Metal high quality connector. | | Tech. specification: Usability: suitable for use with digital sensor and ROB 100 or ROB 110
Performance: steel with plastic (dieletric) parts, soldering pads |
Number of pins: 3 (total 4) |
Color: black / metal
Montage: to cable |
Proportions: 21 x 18 x 70 mm |
Weight: 22 gr. | | | Detail: Male connector for install on cable is particularly suitable for use with digital sensors and ROB counters.This XLR 3 pin connector is standardly used for audio line level input/output or keyboard. Do not plug this accessories. |
|
Eur 1.4,- net of VAT |
|
Plastic box 135 x 95 x 45 mm not only for counters ROB
| This plastic box is ideal for horizontally mounting of ROB counters. Except the counter you can install other parts as DC supply connector and signal connector DIN from measure wheel. Good choice with super price. | | Tech. specification: Usability: universal, also for counter ROB |
Material: plastic |
For the interior use only |
Color: black, green or grey |
Box dimensions (proportions): 95 x 135 x 45 mm |
Weight: 105 gr. | | | Detail: For make the corresponding hole in the front of the plastic box is recommended to use a flake saw. First, the transfer of the required dimensions (eg fix, pencil). Drill a hole in one of the corners. After stretching clamp this slice into the arm saws. Medication movements make the desired cut. Hole for connector is easier, because you can usually make do with drill only. The resulting recommended viewports finely grind emery or sandpaper. | The assembly (build) box is made without screw. | |
|
Eur 6.1,- net of VAT |
|
Germany electro plug GE (230V / 16A)
| Electro plug from German system (peripheral lame / no median terrestrial pin).
Brands PROTEC.class. for tension AC 250 V, 16 A. | | Tech. specification: For tension: AC 230V (250V) |
Max. carried amperage: 16A(AC) |
mark: PROTEC.class |
declaration about deuces CE |
construction: sturdy rubber |
colour: black | | | Detail: Deliverable to 14 days. |
|
on demand |
|
Electro plug 2P (48V / 10A) for CleexCut
| Special electro plug for all tools and accessories for polystyrene cutting CleexCut. | | Tech. specification: For tension: K(2P) 48V AC/DC |
Max. carried amperage: 10A |
mark: ABB |
declaration about deuces CE |
construction: sturdy plastic |
colour: white | | | Detail: For power supply CleexCut Boss and Light. |
|
Eur 3.9,- net of VAT |
|
| | Tech. specification: | | Detail: |
|
on demand |
|
PLC with integrated touch HMI 7 inches Kinco MK70 (30 I/O, ModBus, Ethernet)
| Cost-effective All-In-One PLC with free programming software. Thanks to the rich equipment, an almost universal solution just for your application. For example, machine control, 4 x HSC length measurement, piece counting with data collection. Creation and recall of recipes, control and positioning of servo drives and many others. Contact us, we will prepare a solution just for you. | | Tech. specification: Power supply: DC 24V |
Inputs (integrated): 30 I/O (DI 16xDC24V, DO 14xDC24V transistor, 2xAI, 2xAO) |
Communication port: 2xRS485, Modbus RTU (slave/master), free protocol |
Expansion modules: max. 8 modules |
Real-time clock: Yes |
Dimension (mm): 204 x 150 x 39 mm |
Cutout size (mm): 192 x 138 mm
Display: 7 inch TFT |
Resolution: 800 x 480px / 256 thousand colors |
Display backlight: LED |
Brightness: 250cd/m2 |
Lifetime (full backlight): 50000 hours |
Touch layer: 4-wire precision resistance network |
Processor: 32-bit 400MHz RISC |
Memory: 128M FLASH + 64M DDR |
Recipe memory & RTC: 256KB + RTC |
Ethernet: Yes |
USB: Yes | | | Detail: Already implemented applications (only some): |
control of band saws with a movable front |
multiple counter of pieces of manufactured bags on an automatic line (with data collection) |
length measurement with options for memory and number of pieces |
belt mower control with precise measurement and stepper motor control |
quadruple length counter with data acquisition and displacement control |
control of the lateral alignment of the material during rewinding |
control of the rewinder with the display of the request from the production master and its confirmation |
packaging machine incl. management and tracking of positions |
counter for agricultural purposes to the tractor
General information: |
Industrial design, high performance CPU, application of new DTools software technology platform for HMI programming. It provides remote download, PLC communication pass through network, VNC remote monitoring, device management functions. Standard Ethernet interface, support USB storage expansion to make it easier for users to connect more peripherals. Support a wide range of extension modules to meet the needs of different user applications. |
|
| Other types: | | Basic PLC with HMI MK70 (without software) | | Eur 347.5,- | | PLC with HMI MK70 (demand software for your app) | | from Eur 355.9,- | | PLC with HMI MK70 (demand software + plastic box) | | from Eur 385.6,- |
|
from Eur 347.5,- net of VAT |
|
Incremental measuring wheel (encoder) ROB K100 for high speed ( res. 2.5 mm)
| The ROB K100 incremental measuring wheel encoder is a costeffective
and extremely compact solution for the length measurement etc. Our incremental measuring wheel can be used with counter ROB 210 or ROB 2000. Basic version with high adhesive wheel is ideal for normal materials measuring with resolution to 2.5 mm and max. speed 5.5 m/s.
New model ROB K 128 is available. | | Tech. specification: Type: ROB K100 (basic model for hi-speed measure) |
Usability: continuous length measurement (countup / countdown) |
Purpose: for length measure (longitude counter), fit for install on machines |
Design: professional compact, shaft with roller bearings |
Mounting: by screw with thread to the joint holder (universal)
Measurement method: transfer from the rotation wheel |
The measurement: by incremental encoder with direction distinguish |
Rotary encoder type and properties: 100 imp. / 1 turn (profi) |
Basic wheel type: X Worker with dia. 70 mm, active width 47 mm (width 52 mm), hardness 82A
Power supply: 5 - 24 V DC |
Output: pulse with potential PNP (voltage output) |
Single high level: min.VCC-2,5V |
Single low level: max.0,4V |
Rising and declining time: max. 1 ns |
Max. output frequency: to 300kHz |
Resolution unit: edge of output pulse |
Duty-cycle: 1:1 ±10% |
Phase shift pulse: 90° ± 45° (more in Other photo section) |
Wiring: red - power supply (+5 to 24V DC), black - power supply (0V DC), yellow - OUT Z (zero - normally you do not need it) green - OUT A - impulse for countup, white - OUT B - impulse for countdown |
Working temperature: from -30°C to +85°C |
Protection class: IP 54 |
Vibration proof: 10G / 10 - 2000 Hz |
Shock resistance: 50G / 11 ms |
Max. current load: 40 mA |
Current consumption: max. 80 mA |
Cable longitude: 1 m |
Cable type: 5 x 0.16 mm2
Measure resolution: 2.2mm (basic. wheel X), 1.7mm (XS), 2.7mm (XL) |
Recommended measure speed (for ROB counters): 5.5m/s (basic. wheel X), 4.3m/s (XS), 6.7m/s (XL) |
Max measure speed (6kHz): to 10000 mm / s
Proportions (l x w x h): aprox. 225 x 110 x 70 mm |
Note: height 70 mm with basic wheel (you can use XS or XL wheels too) |
Total weight (without weights): 705 gr.3D Model CAD (STEP, IGS) for download (RAR) | | Detail: The basis of the product is the ROB K100 incremental encoder. You can replace standard wheel for two other types. You can also apply weights for soft materials measuring.
Special design making the ROB K100 extremely robust and resistant to shock and vibration. Accuracy (100 imp. / 1 turn = superior about 2.5 mm), steel and aluminum parts for the best quality, shaft on two bearings and universal mounting using the joint and segment with thread M6. It is our measuring wheel named ROB K100 .
The product versatility enables many uses, e. g. in: Woodworking machinery, Steel and sheet processing, machinery, Storage and conveying technology, Sorting systems, Conveyor belts, Textile machinery, Printing and paperYou can replace standard wheel X Worker with dia. 70 mm and width 47 mm for other two types. The smallest wheel with dia. 55 mm and width 23,5 mm for high accuracy or the narrow wheel with dia. 85 mm and width 13 mm for hard materials measurement. |
|
| Accessories: | | Other wheel XS (small dia. 55 mm, width 23,5 mm) | | Eur 11.7,- | | Other wheel XL (high dia. 85 mm, narrow 13 mm) | | Eur 12.5,- | | Basic wheel X Worker (dia. 70 mm, width 47 mm) | | Eur 13.6,- |
|
not available |
|
Electronic digital counter ROB 2000inOne - programmable longitude counter
| Digital counter ROB version 2000 with special display (show all values) for longitude measure (impouls from incremental encoder). Is fit for adjustable longitude measuring. Made in Czech republic. | | Tech. specification: Type: ROB |
Version: 2000 (AllinOne) |
Basic function: comparative impulses counting (from IRC) |
| | Detail: Very high quality longitude counter (longitude impulses from IRC incremental encoder) |
|
not available |
|
Digital display measuring wheel DG 160 - for measuring to 9999.9 m
| Super functional measuring wheel with dia. 160 mm and rubber unsliding surface. Readable and blue luminary display with incrase or decrase of measuring and data storage and recall functions. Max. longitude for measuring is 9999.9 with accuracy 0.1 m. Practical rack and adjustable, telescopic shaft. Include 2 x AAA batteries for power and cover bag. This wheel is the best option. | | Tech. specification: Typ: measuring wheel |
Material: Plastic / alluminum / rubber |
Max. measuring longitude: 9999.9m |
Display: digitatl with blue illumination |
Indicies min.: 0.1 m |
Max measuring range: 9999.9m and 9999.9feet |
Accuracy: +/-0.5% (10 cm on 100 m) |
Display resolution: 0.1 m/0.1 feet |
Power supply: 2xLR3 batteries (AAA) |
Proportions: 700 x 170 x 80 mm | | | Detail: All for: |
Super readable digital display with blue illuminiation |
With metric and inch reading |
With data storage and recall functions |
Stretchable handle for easy storage (telescopical from 700 to 1250 mm) |
Rubber covered wheel to avoid slipping for higher accuracy | |
|
not available |
|
Electronic counter LUCA 2 (old type)
| Electronic counter LUCA-2 is destined to count the impulses coming from the non-contact or contact sensors. It can distinguish the direction (attribution, subtraction). Read values are counted in two independent units and you can swich displaying of these on the counter display. One of the unit can be set by program for example as the velocity meter.
| | Tech. specification: Supply: 230 V, 50 Hz |
Counter power: 3,5 VA |
Display: LCD, height of characters 12 mm |
Control: 13 buttons |
Zero (clear) button: on the panel (and external) |
Measure range displaying: 0,001 - 99999 |
Adjustable counting constant: 0,060 - 9,999 |
Max. input frequency: 350 Hz by pulses ratio 1:1 (both-direction counting) |
Inputs: 2 counting, 1 for zero (clear) button |
Level L input impulses UL: 0 V - 1 V |
Level H input impulses UH: 4 V - 24 V |
Zero (clear) voltage: 4 V - 24 V |
Input impulses current : min. 4 mA |
Zero (clear) current: min. 4 mA |
Number of counting units: 2 |
1st preset output: 1 x switching contact |
2nd preset output: 1 x connecting contact, 110 V ADC, max. 1 A |
-period of output impulse: adjustable |
Counter state and data can be saved for around 10 years in the unit. |
Protection: IP 66 |
Counter dimensions: 66 x 92 x 120 mm |
Weight: 440 g |
|
It is possible to use the counter like approved measuring device - (it can be sealed by metrological inspectotrate after counting constant is set). |
| | Detail: There are two inputs for impulses counting. There is the keyboard to input the values and to make settings. Both measured and input values are showed on the LCD display (height of digit 12 mm). There is the voltage of 16 24 V to supply sensors, inputs and outputs. There can be up to 4 outputs including 2 relays. All the device is placed into the plastic box with protection IP 66. According to the number of incomimg and outcoming cables there can be bushings done, by the instalation there are no more protection parts necessary.
|
|
| Other accessories: | | LUCA 2 normal (zero button + 2 out) | | on email | | LUCA 2 normal + metrological fulfilment , seal | | on email |
|
not available |
Expanding pneumatic shafts, safety and clamping shafts |
|
|
Expanding pneumatic shafts type PSW-Z
| Pneumatically operated expansion clamping shaft. Shaft body in steel, aluminium or carbon fibre, custom build journal design, air supply axial and /or radial, for core i.d. 50 -200 mm, high load capacity. We delivery only to Czech Republic! | | Tech. specification: Please fill in form! | | Detail: Expanding shafts serie PSW-Z are available in the subsequent designs: |
To fit for 50 / 70 / 70 76,2 / 100 / 120 / 150 152,4, 200 mm. |
Form is here! (0.6 Mb)
|
|
on demand |
|
Expanding pneumatic shafts type PSW-F
| Pneumatically operated expansion clamping shaft. Shaft body in steel or aluminium, custom build journal design, air supply axial and /or radial, for core i.d. 25 - 200 mm, low weight, low price, sturdy design. We delivery only to Czech Republic! | | Tech. specification: Please fill in form! | | Detail: Expanding shafts serie PSW-F are available in the subsequent designs: |
To fit for Ø 25 to 200 mm. |
Form is here! (1Mb)
|
|
on demand |
|
Expanding pneu-mechanical shafts PSW-PMS
| Centric clamping shafts (air-mechanical) Shaft body in steel or aluminium, custom build journal design, air supply axial and /or radical, for core i.d. 70 – 300 mm, forced retraction, dynamic balanced possible, high precision cyclic running for very high
web speed. We delivery only to Czech Republic! | | Tech. specification: Please fill in form! | | Detail: Expanding shafts serie PSW-PMS are available in the subsequent designs: |
To fit for Ø 25 to 300 mm. |
Form is here! (1Mb)
|
|
on demand |
|
Special custom maded shafts (for example type PSW-F-CFS)
| Special solutions shafts with individual custom design, e.g. overhung mounted, separate sealed air tubes (PSW-F), shell constructing for winding w/o cores, stop limit ring etc. We delivery only to Czech Republic! | | Tech. specification: Please fill in form! | | Detail: Note: foto is from model PSW-F-CFS! |
From Ø 20 to 300 mm. |
Form is here! (1Mb)
|
|
on demand |
|
Differential rewind shafts type MFW or MFK
| The differential rewind shaft is suitable for winding materials with different thickness. Constant web tension will be maintained during the winding process. The friction elements work independent from each other. For core from 50 to 254 mm. We delivery only to Czech Republic! | | Tech. specification: Please send e-mail request! | | Detail: Air valves axially or radially, with easy replaceable flat hose, custom built journal design, ball or roll clamping device, minimum roll width 24 mm, robust steel construction, body chromium-plated & polished |
From Ø 50 to 254 mm. | |
|
on demand |
|
Basic safety Chucks type KL.S and KL.F for high strength
| Safety Chucks (foot or flange versions) with or w/o shaft extension, for square dimensions from 14 to 230 mm or for triangle dimensions from 20 to 96 mm, shaft weight up to 64 t, max. torque up to 41.000 Nm, extensive accessories. We delivery only to Czech Republic! | | Tech. specification: Input: square from 14 to 230 mm, triangle from 20 to 96 mm |
or special solutions! |
For shaft weights up to 640.000 N |
Max. torque up to 410.000 Nm |
Special solution on request |
Please send e-mail request! | | Detail: Many of dimensions are completely submitted to your technical specs so ROBEX DK, s.r.o. will provide the right chuck to match your application requirements and to fit your equipment.
Safety chucks "normal" design |
with or without shaft | |
|
on demand |
|
Sliding safety Chucks type SKL.S and SKL.F for hi-speed changes
| Sliding Safety Chucks (foot and flange versions) with or w/o shaft extension, with fixed and moving drive, for square dimensions 22 - 50 mm, for triangle dimensions 30 - 40 mm, shaft weight up to 2,8 t, max. torque up to 1.100 Nm, extensive accessories. We delivery only to Czech Republic! | | Tech. specification: Input: square from 14 to 230 mm, triangle from 20 to 96 mm |
or special solutions! |
For shaft weights up to 640.000 N |
Max. torque up to 410.000 Nm |
Special solution on request |
Please send e-mail request! | | Detail: Sliding chucks are the ideal and low-cost solution for applications which require an axial adjustment of the core during operation.
Safety chucks 'sliding' design with or without shaft, with handwheel or without | |
|
on demand |
|
Spare parts and accessories for expanding clamping shafts and chucks
| We deliveryv all types spare parts for expanding clamping shafts, friction shaft and chucks. Please send request. We delivery only to Czech Republic! | | Tech. specification: Special solution on request |
Please send e-mail request! | | Detail: Different air valves, rotary connections, electro-pneumatic converter, spare parts for expanding clamping shafts and chucks |
|
on demand |
|
Complete service and reparation of expanding air shafts
| We conduct full service and raparation of expandidng air schafts. From change of air valve, exchange of pneumatic tube or gripping sectors and segments to complete reparation. Older schafts doesn't need to old metal scrap sometimes. We delivery only to Czech Republic! | | Tech. specification: Special solution on request |
Please send e-mail request! | | Detail: Full service support for yours air schafts. |
|
on demand |
Cable reels, balancers |
|
|
Cable reel ser. C 20 - 12 m - type C 20 POWER (AC 230 V)
| New model of cable reel, haul typ. C20
Flexible supply seat power control energy always at hand. Fit for development to machine. | | Tech. specification: For tension AC 230V, 50 Hz |
For current transfer max. 10 A |
Max. input: 2500 W |
Type using cable: H07RN-F |
Output cable: 3 x 1.5 mm2 |
Connection lead: longitude 1 m, 3 x 1.5 mm2 |
Seat power control protection diamond: IP 55 |
Longitude cable 12 m. |
Possibility on-abridgement according to needs. |
Materiality winder: 4 Kg |
Proportions: 250 x 315 x 170 mm |
Maded from 100% recyclable material |
Minimum working temperature: - 10 st.C |
| | Detail: A practical cable reel for industrial and do-it-yourself applications.
Ser. C 20 is a compact cable reel manufactured in high impact plastic material. A cable
reel offers safe and easy access to electric power. The elimination of cable clutter
minimizes the risk for tripping accidents. |
|
| Type: | | Cable reel C 20 blue without europlug, 230V, 3x1.5mm, 12m | | Eur 313,- | | Cable reel C 20 grey without europlug, 230V, 3x1.5mm, 12m | | Eur 313,- | | Cable reel C 20 blue with europlug, 230V, 3x1.5mm, 12m | | Eur 353.6,- | | Cable reel C 20 grey with europlug, 230V, 3x1.5mm, 12m | | Eur 353.6,- |
|
from Eur 313,- net of VAT |
|
Cable reel ser. C 30 - 17 m - type C 20 POWER (AC 230 V)
| New model of cable reel, haul typ. C30
Flexible supply seat power control energy always at hand. Fit for development to machine. | | Tech. specification: For voltage AC 230V, 50 Hz |
For current transfer max. 10 A / 16 A |
Max. input: 2500 W / 3800 W |
Type using cable: H07RN-F |
Output cable: 3 x 1.5 mm2 / 3 x 2.5mm2 |
Connection lead: longitude 1 m, 3 x 1.5 mm2 / 3 x 2.5 mm2 |
Seat power control protection diamond: IP 55 |
Longitude cable 17 m. |
Possibility on-abridgement according to needs. |
Materiality winder: 6 Kg |
Proportions: 400 x 375 x 180 mm |
Maded from 100% recyclable material |
Minimum working temperature: - 10 st.C |
| | Detail: A practical cable reel for industrial and do-it-yourself applications.
Ser. C 30 is a compact cable reel manufactured in high impact plastic material. A cable reel offers safe and easy access to electric power. The elimination of cable clutter minimizes the risk for tripping accidents. |
|
| Type: | | Cable reel C 30 blue without europlug, 230V, 3x1.5mm, 17m | | Eur 365.8,- | | Cable reel C 30 grey without europlug, 230V, 3x1.5mm, 17m | | Eur 365.8,- | | Cable reel C 30 blue with europlug, 230V, 3x1.5mm, 17m | | Eur 406.5,- | | Cable reel C 30 grey with europlug, 230V, 3x1.5mm, 17m | | Eur 406.5,- | | Cable reel C 30 blue with europlug, 230V, 3x2.5mm, 17m | | Eur 502.6,- |
|
from Eur 365.8,- net of VAT |
|
Cable reel ser. 793 - steel, profi (AC 230 V or AC 400 V)
| Cable reel, haul typ. 793
Fit for development to the running like manipulation supply electrical. energy, or to development to movable machine. | | Tech. specification: Possibility on-abridgement according to needs. |
Type of cable: HO7RN-F |
Degree of protection code: IP 55 |
Tested and approved according to IEC 61316. |
Rubber power cable. |
| | Detail: Spring operated retractable reels, a safe and cost saving way to handle cables in workshops and industry. The loose cable end, sometimes with a tool attached, is always there easily
found and out of harms way when not used. The elimination of cable clutter on the workshop floor minimises the risk for tripping accidents, increases efficiency and creates a neat impression.
Ser. 793 for low voltage is a popular encased design, made from die-cast aluminium. The two models for max. 500 V and max. 250 V come with the following general features.
|
|
| Type: | | for 250V-3x2,5mm2,L=18m,16A,3800W | | Eur 1072.2,- | | for 250V-3x2,5mm2,L=25m,16A,3800W | | Eur 1140.4,- | | for 400-V-5x2,5mm2,L=15m,16A,6900W | | Eur 1214.1,- | | for 400-V-5x2,5mm2,L=22m,16A,6900W | | Eur 1326.2,- |
|
from Eur 1072.2,- net of VAT |
|
Balancer (types 810) - ultra profi
| Balancers series 810 helps lift tools and reduces strain on operators. Balancer effectively balances the weight of the tool during work operations and keeps the tool in place when not being used. The balancer comes in three different models and in nine weight classes, with a span from 0.5 kg to 10.9 kg (1 lb to 24 lb). | | Tech. specification: Type A - for materiality 0.5 - 0.9 kg, longitude ropes 1.6 m nylon |
Type A - for materiality 0.9 - 1.8 kg, longitude ropes 1.6 m nylon |
Type B - for materiality 1.8 - 2.7 kg, longitude ropes 2 m steel wire |
Type B - for materiality 2.7 - 3.6 kg, longitude ropes 2 m steel wire |
Type C - for materiality 2.7 - 4.0 kg, longitude ropes 2 m steel wire |
Type C - for materiality 4.0 - 5.9 kg, longitude ropes 2 m steel wire |
Type C - for materiality 5.9 - 8.2 kg, longitude ropes 2 m steel wire |
Type C - for materiality 8.2 - 10.9 kg, longitude ropes 2 m steel wire |
Weight 14 Kg | | | Detail: Assembly work made easier. | With the Nederman Balancer, the tool becomes virtually weightless in the hands of the operator and can be moved around easily with little effort. This means an increase in operator freedom and a reduction in strenuous work. | Total flexibility within the working area. The spring tension is easily adjusted to match the weight of the tool being used. The long cable allows for operations over a large workspace. The mounting shackle permits a full 360° rotation during assembly operations. | Maintenance-free construction. | The Balancer is of a sturdy, reliable construction with a minimum number of moving parts. It withstands daily use in a normal industrial environment without requiring service. | |
|
| Type: | | Typ A - 0.5 - 0.9 kg | | Eur 159.7,- | | Typ A - 0.9 - 1.8 kg | | Eur 159.7,- | | Typ B - 1.8 - 2.7 kg | | Eur 313.6,- | | Typ B - 2.7 - 3.6 kg | | Eur 313.6,- | | Typ C - 2.7 - 4.0 kg | | Eur 589.4,- | | Typ C - 4.0 - 5.9 kg | | Eur 654.9,- | | Typ C - 5.9 - 8.2 kg | | Eur 709.6,- | | Typ C - 8.2 - 10.9 kg | | Eur 820,- |
|
from Eur 159.7,- net of VAT |
|
