ROBEX DK, s.r.o. - cutting technique, accessories, custom made machinery

SHOPWITH NOT ONLY
PROFESSIONALLY
TECHNIQUE CUSTOM
MADE SINGLE-PURPOSE
MACHINES

CART (0)

On-line catalogue - english

Hand held cutters, cutting machines & scissors

Sharpener, whetstone, grinder for cloth cutters and band knife saw

Grinding mechanism for band saws (fully adjustable in three axes) - Pragoděv PRS4, RS1100

Grinding ready for mounting on a band saw Pragoděv PRS4 and RS1100 models. This fully adjustable grinding replaces the old, outdated grinding used on these saws. It features simple installation on an saws, precision knives sharp enough.

Tech. specification: Proportions: 200 x 200 x 200 mm | Weight: 3,2 kg | Grinding stone (spare parts): 50 x 13 x 10 mm | Producer: ROBEX DK, s.r.o. (CZ)

Detail: Complete grinding includes: | Grinding their own (see photo) | 1 +1 pcs side cover stainless steel plate | 1 screw DIN 912 M 8 x 20 including washers | 2x screw DIN 912 M 6 x 20 including nuts and 2 washers | 5x screw DIN 912 M 4 x 16 including nut and two washers | 1x clevis, including columns and 2 pieces of nuts M10

Eur 402.5,- net of VAT

Rasor F5074 - grinding stone with pin for Nera, DS503, FP503

Origin sharpener designed for Rasor DS503, FP503 and NERA cutters. A grinding wheel with a diameter of 18 mm and a thickness of 5 mm is glued to the carrier of the steel shaft. Easy replacement, high-quality grinding.

Tech. specification: Manufacturer: Rasor | Type (manufacturer's designation): F5074 | Original part Grinding wheel diameter: 18 mm | Grit strength (thickness): 5 mm | Grinding type: fine grinding Shaft length: 27 mm | Shaft diameter: 5 mm | Production of the shaft: with a driver and a glued grinding wheel, | shaft with offset ca. 8mm and internal thread Overall dimensions: 18.5 (x 18.5) x 35 mm | Weight: 8 gr. Packaging: plastic bag | Country of origin: Italy |

Detail: Original part directly from the manufacturer RASOR. Our company is the exclusive representative in this region.We also provide affordable, complete service and repairs using only original Rasor spare parts.

on demand

YJ 65 - whetstone (pos. no. 52)

Grinder stone for YJ-65 cutter and its equivalents. Grinder suitable for YJ-65 Basic (original), YJ-65 Air, Yj-65 Profi and other cutters. Grinding wheel in a version with a glued brass center and a cut thread for problem-free mounting on the cutter.

Detail: You can replace the grinding stone by disassembling the entire grinding assembly /51/. The sander is screwed onto the shaft /54/.It is not necessary to throw out the sander immediately if there are slight irregularities. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.More information on phone number + 420 499 321 109 or by e-mail.

Eur 3.4,- net of VAT

YJ-65, YJ-65 Basic, YJ-65 Air - complete sharpening (pos. no. 51)

Original fully fitted sharpeninging wheel for cloth cutters of the YJ-65 series. The set includes a sharpening stone, holder, pair of screws for attachment to the cutter, shaft and a fingerboard with a spring. Just complete sharpening device.

Tech. specification: Type (manufacturer's designation): 51 | Original part Grinding wheel diameter: 18 mm | Grit strength (thickness): 8 mm | Grinding type: fine grinding Total length: 37 mm | Overall dimensions: 37 x 26 x 22 mm | Weight: 24 gr. Packaging: plastic bag |

Detail: Original part directly from the Lejiang manufacturer.We also provide affordable, complete service and repairs using only original spare parts.Consists of items: 52 61 |

Eur 14.4,- net of VAT

KM RS 100 ( 30 x 11 x M4 ) - original sharpener for the KM RS-100 cutter

Very high-quality original pot grinder with a diameter of 30 mm, a width of 10 mm and a mounting hole with an M4 thread in a glued brass case. The grinder designed for the Japanese KM RS100 cutter has a recess (pot bulge) of 20 x 4 mm and and fine green-grey sandblasting.

Detail: You can replace the grinding stone by disassembling the grinding parts assembly. The sander is screwed onto an M4 screw.It is not necessary to throw out the sander immediately if there are slight irregularities. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 11.5,- net of VAT

RC 280, RSD 100 ( 30 x 11 x M4 ) - sharpener for copies of the KM RS-100 cutter

Pot sharpener for disc cutters RSD-100, RC-280, KM RS-100, RCS-100 and their other copies, be it Suprena, Lejiang, Dayang... This fine sharpener can also be used as a variant on the original KM cutter RS-100. Color pink or green-grey, according to the current series.

Eur 7.4,- net of VAT

Vibromat S 54 - pot whetstone for cloth cutter

Grinder intended for the Vibromat S 54 cutter. The pot-type grinder is incl. glued inserts. This pot grinder (with offset) with a diameter of 13 mm, a width of 8 mm and a center hole of 3 mm is intended for Vibromat S-54 cutters.

Detail: You can replace the grinding stone by disassembling the entire grinding assembly. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 9.2,- net of VAT

Vibromat S 52 - small pot whetstone for cloth cutter

Grinder intended for the Vibromat S 52 cutter. The pot-type grinder is incl. glued inserts. This pot grinder (with offset) with a diameter of 10 mm, a width of 8 mm and a center hole of 3 mm is intended for Vibromat S-52 cutters.

Eur 3.7,- net of VAT

Allstar AS 350 - pot whetstone for the cloth cutter

Grinder for Alstar AS-350 cutters. This 21mm diameter, 8mm wide, 10mm center hole pot grinder (with offset) is an original part from our stock for the historically popular AS-350 cutters.

Detail: You can replace the grinding stone by disassembling the entire grinding assembly.It is not necessary to throw out the sander immediately if there are slight irregularities. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.More information on phone no. + 420 499 321 109 or by e-mail.

Eur 5.8,- net of VAT

YH 935, RSD 50, MB 50 - sharpening stone with spinel for cloth cutter

Sharpening stone for cutters YH-593, YH 593-D522, RSD-50, MB-50 incl. spindel. This fine sharpener (with glued shaft) with a total stone diameter of 16 mm, a width of 6 mm and a central shaft is also intended for the equivalents of these cutters.

Eur 2.9,- net of VAT

KM KS EU, FX and Eastman 5 inches - abrasive belts (middle 100K)

Sanding, abrasive belt of medium grit (100K) for cutters KM KS EU, FX, Eastman and other five-inch cutters, or their copies. Grinding belt for the long life of Eastman or KM Hashima knives made of HSS high-speed steel.

Tech. specification: Abrasive: 100K (Medium) | Need for a cutter: 2 pcs Packaging: plastic bag | Size: 195 x 5 mm | Weight: 1.1 gr. |

Detail: Abrasive belts are mainly used for sharpening vertical knives on vertical saws. Most of the world's manufacturers of vertical, vertical cutters use belts for grinding. The only exception is a small vertical cutter from the HF company, which uses classic disc grinders.

Eur 0.3,- net of VAT

KM AUV, AUH, KS, EU, GX and Eastman from 6 inches - abrasive belts (middle 100K)

Sanding, abrasive belt for vertical saws, vertical cutters Eastman, KM KS AUV, KM KS, KM KS EU, KM KS GX, or their copies. Grinding belt for the long life of Eastman or KM Hashima knives made of HSS high-speed steel. Can also be used on the Csepel CS532 / 13, 16, 18 vertical saw and generally all cutters from 6 to 8 inches.

Tech. specification: Abrasive: 100K (Medium) | Need for a cutter: 2 pcs Packaging: plastic bag | Size: 220 x 6 mm | Weight: 1.4 gr. |

Eur 0.4,- net of VAT

BR 180 ( 70 x 13 x 13 mm ) - band saw whetstone (pair)

Grinding wheels with proportions 70x13x13 mm for vertical band saw BR 180. Always replace in pairs. The BR180 saw is equipped with a pair of Tyrolit grinding wheels with a roughness of 120 M and a white grain.

Detail: A disc grinder with a central hole of 13 mm, an outer diameter of 70 mm and a thickness of 13 mm from the company Tyrolit with the designation 99BA 120M (FA 2028165) is mounted on the shaft of the grinding device of band saws BR180. Only a high-quality sharpener will ensure a high-quality sharpening of your saw blade. Price shown is for a pair.

Eur 15.6,- net of VAT

Kuris ( 65 x 12 x 8 mm ) - band saw whetstone (pair)

Grinding wheels with dimensions 65x12x8 mm for Kuris vertical band saws. Must always be replaced in pairs. Kuris saws are always equipped with a pair of grinding wheels with a fine grinding of white grain.

Tech. specification: Abrasive: fine grinding | Grain: white Size: 65 x 12 x 8 mm | Packaging: plastic bag | Weight: 78 gr. / 1pc |

Detail: A disc grinder with a central hole of 8 mm, an outer diameter of 65 mm and a thickness of 12 mm is mounted on the shaft of the Kuris band saw grinding device. Only a high-quality sharpener will ensure a high-quality sharpening of your saw blade. Price shown is for a pair.

Eur 10,- net of VAT

HF 200T ( 65 x 12 x 20 mm ) - band saw whetstone (pair)

Grinding wheels with dimensions 65x12x20 mm for vertical band saws HF-200 T. Suitable to replace the whole pair. Hoffman saws are always equipped with a pair of grinding wheels with a fine grinding of white grain.

Tech. specification: Abrasive: fine | Grain: white Dimension: 65 x 12 x 20 mm | Packaging: plastic bag | Weight: 88 gr. / 1pc |

Detail: A 20 mm hole can be lined (glued insert) with brass for an 8 or 10 mm hole.A disc grinder with a central hole of 20 mm, an outer diameter of 65 mm and a thickness of 12 mm is mounted on the shaft of the Kuris band saw grinding device. Only a high-quality sharpener will ensure a high-quality sharpening of your saw blade. Price shown is for a pair.

Eur 10,- net of VAT

Kuris ( 65 x 10 x 8.15 mm ) - band saw whetstone

Grinding wheels with dimensions 65x10x8.15 mm for Kuris vertical band saws. Must always be replaced in pairs. Kuris saws are fitted with a pair of gray fine-grit (150) grinding wheels. This sander with a countersunk hole approx. 8 mm and one-sided rounding.

Detail: A disc grinder with a central hole of 8.15 mm, an outer diameter of 65 mm and a thickness of 10 mm is mounted on the shaft of the Kuris band saw grinding device. Only a high-quality sharpener will ensure a high-quality sharpening of your saw blade. The price is for 1 pc.More information on phone number + 420 499 321 109 or by e-mail.

Eur 13.8,- net of VAT

VP 90, BR 90 ( 50 x 10 x 10 mm ) - band saw wheetstone

Grinder with dimensions 50x10x10 mm for vertical band saws VP-90 or BR-90. Ideally, always replace in pairs. Both VP and BR saws are always equipped with a pair of grinding wheels. Price for 1 piece.

Tech. specification:

Detail: A disc grinder with a central hole of 10 mm, an outer diameter of 50 mm and a thickness of 10 mm is mounted on the shaft of the VP90 or BR90 band saw grinding device. Only a high-quality sharpener will ensure a high-quality sharpening of your saw blade.More information on phone number + 420 499 321 109 or by e-mail.

Eur 14.2,-

PŘS 4, PŘS 3, PŘS 2 (50 x 13 x 10 mm) - rough disc band saws whetstone - stock sale

Coarse grinding wheel (100) for the popular Pragoděv band saw PŘS4, PŘS3, PŘS2 and RS1100 with an outer diameter of 50 mm, an inner hole with a diameter of 13 mm and a thickness of 10 mm. Price for 1 piece. A rare sale of above-standard stock of Czech-made saw blades (additional discounts for larger orders - see details).

Tech. specification: Abrasive: 100 | Grain: white Dimension: 50 x 10 x 13 mm | Packaging: plastic bag | Weight: 45 gr. / 1pc |

Detail: When purchasing more than 100 pcs, including an additional 20% discount. | When purchasing over 500 pcs, including an additional 25% discount. | Another possibility of negotiating individual conditions. The round grinder with the type designation 50x13x10 with a coarse grind (100) is particularly suitable for sharpening band knives for cutting textile materials with a normal edge.Only a high-quality sharpener will ensure a high-quality grinding of the band knife of your saw. It is not necessary to throw away the sander immediately in case of slight unevenness. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.This promotion only applies to this type of grinder. We offer a grinder with a fine grind under a different item.

Eur 1.7,- net of VAT

PŘS 4, PŘS 3, PŘS 2 (50 x 13 x 10 mm) - fine disc band saws whetstone

Fine grinding wheel (120) for the popular Pragoděv band saw PŘS4, PŘS3, PŘS2 and RS1100 with an outer diameter of 50 mm, an inner hole with a diameter of 13 mm and a thickness of 10 mm. Price for 1 piece.

Tech. specification: Abrasive: 120 | Grain: white Dimension: 50 x 10 x 13 mm | Packaging: plastic bag | Weight: 45 gr. / 1pc |

Detail: The round grinder with the type designation 50x13x10 with a fine grind (120) is particularly suitable for sharpening band knives for cutting textile materials with a convex or concave edge.Only a high-quality sharpener will ensure a high-quality grinding of the band knife of your saw. It is not necessary to throw away the sander immediately in case of slight unevenness. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 3.6,- net of VAT

PŘS 4, PŘS 3, PŘS 2 ( 50 x 20 x 13 mm ) - band saw wide whetstone

Grinding wheel for vertical band saws Pragoděv PŘS4, PŘS3, PŘS2, RS1100. Some band saws are equipped with these wide grinding wheels. Ideally, always replace in pairs. Pragoděv saws are always fitted with a pair of grinding wheels. Price for 1 piece.

Tech. specification: Abrasive: 120 | Grain: white Dimension: 50 x 20 x 13 mm | Packaging: plastic bag | Weight: 85 gr. / 1pc |

Detail: A disc grinder with a central hole of 13 mm, an outer diameter of 50 mm and a thickness of 20 mm is mounted on the shaft of the grinding device of Pragoděv band saws. Only a high-quality sharpener will ensure a high-quality sharpening of the band knife of your saw. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 4.2,- net of VAT

BR 150 ( 25 x 25 x 6 mm ) - band saws wheetstone (pair)

Fine sharpening stone for band saw BR-150 with 25mm outer diameter, 6mm inner hole in a bonded brass insert (33x10mm) and 25mm thickness. Price for 2 pcs.

Detail: Round/cylindrical grinder with type designation 25x25x6 with a fine grind and a brass insert in the shape of a tube with dimensions 33 x 10 mm and a hole of 6 mm. It is not necessary to throw away the sander immediately in case of slight unevenness. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 8.3,- net of VAT

PP 1, VP 50, BR 50 ( 20 x 20 x 6 mm ) - band saws whetstone (pair)

Saw grinder VP50, BR50 and PP1 - a pair of grinders for these band saws. Grinding wheels with dimensions of 20x20x6 mm for vertical band saws PP-1, VP-50, BR-50 with a glued brass center along the entire length (width) of the grinding wheel. It is advisable to replace the whole pair. The saws are always equipped with a pair of grinding wheels with a fine grinding of white grain.

Detail: Disc, cylindrical grinder with a central hole of 6 mm, an outer diameter of 20 mm and a thickness of 20 mm, the center of which is formed by a glued mosaic adapter. Only a high-quality sharpening stone will ensure a high-quality grinding of the band knife of your saw.You can replace the grinding stone by disassembling the entire grinding assembly and threading it onto the shaft.It is not necessary to throw away the grinding stone immediately if there are slight irregularities. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 5.1,- net of VAT

HF 60 ( 25 x 5 x 6 mm ) - circural sharepining stones for cloth cutter (pair)

Original fine grinding wheels for the Hoffman HF-60 cutter with a diameter of 25 mm, a width of 5 mm and a center hole of 6 mm and an end bevel. Price per pair.

Detail: Up to a certain date of production, the grinding of the HF-60 cutters was equipped with a pair of grinding wheels. The reason was the use of a double-edged knife. We recommend replacing the entire pair of grinding wheels at once.From a certain date, the HF-60 cutters are equipped with only one grinding wheel.It is not necessary to throw out the grinding wheel immediately in case of slight irregularities. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 2.8,- net of VAT

HF 100, HF 125, RAK 96, RAK 99 ( 35 x 5 x 8 mm ) - sharpening stones for cloth cutter (pair)

Original fine grinding wheels for the Hoffman HF-100 and HF-125 cutter with a diameter of 35 mm, a width of 5 mm and a center hole of 8 mm and an end bevel. Price per pair. The grinders can also be used on RAK-96 and RAK-99. They can also be used as a spare part for NTH-100 and NTH-125.

Detail: Up to a certain date of production, the grinding of the HF-60 cutters was equipped with a pair of grinding wheels. The reason was the use of a double-edged knife. We recommend replacing the entire pair of grinding wheels at once.From a certain date, the HF cutters are equipped with only one grinding wheel.It is not necessary to throw out the grinding wheel immediately if there are slight irregularities. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 3.7,- net of VAT

HF 120S, HF 140S, HF170S, HF195S, RAK 120, RAK 140, RAK 170 ( 35 x 17 x 6 mm ) - pot sharpening stone for vertical cutters

Original pot grinder with fine grain for Hoffman vertical cutters HF120S to HF195S. As a counterpart to this grinding wheel, these cutters use a smaller HF pot grinding wheel. Price for 1 piece. In addition to the HF-120S, HF-140S, HF-170S, HF-195S, the grinder can also be used on the RAK 120, RAK 140 and RAK 170 cutters.

Detail: You can replace the whetstone by disassembling the entire grinding assembly.For the HF120 S HF195 S cutters, 1 piece of this whetstone is used together with the smaller HF pot whetstone (01005401/1).The whetstone is not necessary for moderate immediately throw out inequalities. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 3.4,- net of VAT

HF 60S, HF 120S - 195S ( 25 x 10 x 6 mm ) - pot sharpening stone for vertical cutters

Original pot grinder with a fine grain for the Hoffman HF-60 vertical cutter, which is also used as a counterpart to the larger pot grinder on the HF-120S to HF-195S cutters. Price for 1 piece.

Detail: You can replace the grinding stone by disassembling the entire grinding assembly.Only 1 piece of this grinding wheel is used for the HF60 S cutter. For cutters HF120 S HF195 S, 1 piece of this grinding wheel is used together with the larger HF pot grinding wheel (01005401/2). In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 2.9,- net of VAT

WD 2 - disc / pot sharpening stone for the WD-2 round knife cloth cutter

Grinding wheel for the WD2 cutter. We no longer offer the WD-2 cutter, but we still have some spare parts available. This sander is part of a complete sanding B-71 line under the designation B-7.

Tech. specification: Pos. record part: B-7 | Designed for: NewTech WD-2 hand-held disc cutter | Required quantity: 1 pc Type: sander with internal offset / pot sander | Roughness: fine grinding | Class: excellent quality Weight: 4 gr. | Packaging: plastic bag |

on demand

CSEPEL CS 539 / 10 ( 32 x 12 x 10 mm ) - disc / pot sharpenning stone for cloth cutter CS539-10

Pot grinder for Cselpel CS 539/10 cutters. It is used in pairs on these cutters. Price for 1 piece.

Detail: You can replace the whetstone by disassembling the entire grinding assembly.2 pcs of this whetstone are used for Csepel (Rubikon) CS539-10 cutters.It is not necessary to throw away the whetstone immediately in case of slight unevenness. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Kč 4.9,- net of VAT

CSEPEL CS 539 / 12, 15, 20 ( 40 x 9 x 6 mm ) - disc sharpening stone for big cloth cutter CS539-12 to 20 (pair)

Grinding wheels for Cselpel CS 539 series cutters, except type 10. It is used in pairs on these cutters. Price per pair. For cutters CS 539/12, CS 539/15, CS 539/20.

Detail: You can replace the whetstone by disassembling the entire grinding assembly.2 pcs of this whetstone are used for Csepel (Rubikon) cutters CS539-12 to 20.It is not necessary to throw away the whetstone immediately in case of slight unevenness. In some cases, it is possible to align it with sandpaper placed on a flat surface. Pure alcohol can be used for cleaning. However, only use the sander when it is completely dry.For more information, call + 420 499 321 109 or e-mail.

Eur 10.5,- net of VAT

Maimin - whetstone

Wheelstone for cutting machine Maimin

Tech. specification:

Detail:

Eur 24.4,- net of VAT

KM RS 50 - whetstone

Tech. specification:

Detail:

on demand

Kuris KHR 15 - whetstone

Tech. specification:

Detail:

Type:
Kuris KHR 15 - whetstone type 1	1013501	Eur 20.8,-
Kuris KHR 15 - whetstone type 2	1018101	Eur 10.2,-

from Eur 10.2,- net of VAT

Kuris BOM 30, 100, 101 - whetstone

Tech. specification:

Detail: BOM 30 1018015 | BOM 100 1018000 | BOM 101 1018001 | Price without VAT

Type:
Kuris BOM 30 - whetstone	1018015	Eur 12.6,-
Kuris BOM 100 - whetstone	1018000	Eur 11.4,-
Kuris BOM 101 - whetstone	1018001	Eur 12.3,-

on detail

Kuris Novita Standart - whetstone

Tech. specification:

Detail:

Eur 13.2,- net of VAT

Kuris Novita Plus - whetstone

Tech. specification:

Detail:

Eur 14.2,- net of VAT

Kuris Novita Super - whetstone

Tech. specification:

Detail:

Eur 13.2,- net of VAT

Suprena CR 8B, PC1062 - whetstone

Wheet stone for hand held acu cutter Suprena CR-8B, PC1062 and other models od Suprena cloth cutters.

Tech. specification:

Detail:

Eur 5.8,- net of VAT

Suprena M 1007, HM 1005 - brousek

Tech. specification:

Detail: M 1007 Eur 6.7,1008601 | MC 1008 Eur 6.7,10086011 |

Eur 8.9,- net of VAT

Panda 4 ( 18 x 9 x 10 mm ) - small pot wheetstone for the Panda-4 vertical cutter

A small pot sharpening stone with 18 mm outer diameter, 10 mm hole and 9 mm width for the Panda-4 vertical cutter and its equivalents.

on demand

KRA 5,6 - whetstone

D=40 mm

Tech. specification: Calibre: 40 mm | Fine wheetstone |

Detail:

Eur 20.3,- net of VAT

KV 900 - whetstone

Tech. specification:

Detail:

Type:
small	1014001	Eur 4.4,-
big	1014002	Eur 5.7,-
big original	10140021	Eur 12.5,-

on detail

KV 700 cirguit - whetstone

Tech. specification:

Detail:

Eur 15.8,- net of VAT

KV 700 vertical - whetstone

Tech. specification:

Detail:

on demand

KV 140 - 200, AS 350C - whetstone

Tech. specification:

Detail:

Eur 4.2,- net of VAT

KV 1350 - 2000 - whetstone

Tech. specification:

Detail:

Eur 5.6,- net of VAT

BR 180L, 1000, 1100 - brousek

Tech. specification:

Detail:

Type:
typ 1 - 70 x 13 x 13 mm	3009001	Eur 15.6,-
typ 2 - 80 x 16 x 20 mm - 80K30090	30090011	Eur 14.4,-
typ 3 - 80 x 16 x 20 mm - 80K zekon	30090012	Eur 17.7,-

from Eur 14.4,- / 2pcs)

BR 1300 - whetstone

Tech. specification:

Detail:

Eur 12.2,- net of VAT

BR 2100, RS 400 - whetstone

Tech. specification:

Detail:

Eur 14.9,- net of VAT

Other wetstone

Tech. specification:

Detail:

on demand

Other wetstone

Tech. specification:

Detail:

on demand

Back to full catalog listing Print the selection Gop to back to main page

Name / Validity	Domain and processor	Saved info
Cookchecked 30 days	www.robex-dk.cz / ROBEX DK, s.r.o.	cookies preference
PHPSESSID until the end	www.robex-dk.cz / ROBEX DK, s.r.o.	about user relations
sdmenu_my_menu 30 days	www.robex-dk.cz / ROBEX DK, s.r.o.	left category menu

Name / Validity	Domain and processor	Saved info
YouTube 0 - 300 days	www.youtube.com / YouTube	about playing products videos
Google 1 - 90 days	www.robex-dk.cz / Google	about your visit