Machines for flexibile foam & other foam |
 |
Band saw for foam material |
|
 |
RB-VP 1400 - automatic vertical band saw (cutting and formatting)
| Automatic vertical band saw RB VP 1400 for easy trimming, formatting and division of PUR blocks. In the longitudinal direction the cut is made by the feed of the material and in the transverse direction by the feed of the saw. The device enables cutting, formatting, cutting of a block of PUR material without demanding manipulation of the block during cutting. | | Tech. specification: Supply voltage: AC 400 V, 50 Hz |
Supply fuse: 20 A |
Control voltage: DC 24 V |
Noise: <75dB
Table: 2 x sliding (belt conveyor) |
Dimensions of processed blocks max. (h x w x l): 1050 x 1450 x 2050 mm | | | Detail: The basic part consists of a vertical band saw with a system of machine rotation of the knife by an angle of 90 ° while the saw is running by means of pneumatic cylinders. This allows cutting in two perpendicular directions without the hassle of manipulating blocks of material during cutting. The saw is equipped with a double-edged knife for cutting in all directions. The grinding of the knife is ensured by a pair of grinders, which are driven by electric motors. The whole set of the saw is placed on a linear guide, which ensures its feed into the cut so it is possible to cut in the transverse direction when the knife is turned. The feed is provided by an electric motor with feedback for accurate measurement of the saw position. | | The working surface consists of a pair of belt conveyors. The transition between the conveyors consists of special rails and guides, between which the saw blade is moved during its transverse movement. On the conveyors, the block of material is moved synchronously and thus a longitudinal cut is ensured. The belt feeds are provided by electric motors with feedback to accurately measure the position of the block and to ensure synchronized joint movement. It serves as a place for loading and unloading the processed block and at the same time as a transport intermediate element when moving the block to the cutting belt conveyors. | The device is controlled from the operator terminal, which is located separately, near the cutting plane, so that the operator has a perfect overview of the situation and condition of the machine. | | The device has many options and cutting functions: |
Positions, lengths and widths can be entered in the appropriate programs (recipes) for frequent cutting variants |
only transverse or longitudinal cuts (manually entered or automatically according to the recipe) |
complete trimming to the required length and width of the block (manually entered or according to the recipe) |
vertical division into plates in the transverse direction (manually entered or according to recipe) |
vertical division into slabs in the longitudinal direction (manually entered or according to recipe) |
various combinations of cross and longitudinal sections | |
|
on demand |
|
RB-VP 1400 - automatic vertical band saw (cutting and formatting)
| The saw is designed exclusively for cutting flexible foam materials into
bulk density 160kg / m3. Cuts from semi-finished products up to 2 sizes
000 x 2 200 mm (area) 1300 mm high depending on bulk density. The saw is equipped with a control system for precise positioning of the face and measuring the cutting position. Possibility of remote management and data export to USB. | | Tech. specification: Supply voltage: AC 400 V, 50 Hz |
Supply fuse: 20 A |
Control voltage: DC 24 V |
Total max el. machine power: 8050 W |
Max. air pressure / operating pressure: 6 / 3.5 bar |
Noise: <75dB | |
Forehead: positioning with motorized travel with an accuracy of 0.1mm |
Control system: PLC with remote management + touch screen 7 inches | |
Maximum height of cut charge: 1300 mm |
Maximum cutting length: 2200 mm |
Table size to the right of the knife (unloading): 1300 mm |
Table size to the left of the knife: 2100 mm |
Stop face height: 1000 mm |
Saw blade length: 8650 mm |
Grinders: quality A 998 12M SV 70 x 13 x 13 mm |
Gross weight: 960 kg | | | Detail: Unloading of the saw, ie the distance of the knife from the arm is 1300 mm, the left side of the table 2100 mm. The saw can be fitted with saw blades
belts up to 15 mm wide with various blade shapes or smooth straight-edged knives. | | The saw frame is welded from rectangular closed profiles. Removable covers are made of sheet steel. The four aluminum guide wheels are mounted on articulated shafts. Banding of the circumferential wheels with polyurethane elastomer with high abrasion resistance, ensuring smooth running of the saw belt. The lower front wheel is driven by an electric motor with the possibility of continuous regulation of the belt knife speed in relation to the material being processed.
The upper guide system is located at the bottom of the movable column. The guidance of this column forms a whole, which is k
saw screwed with the possibility of geometric adjustment according to the direction of the saw belt. The lower and upper guide system consists of a pair of eccentric hard pins. Rolling knife in the form of rolling. The grinding space of the knife is separated by partitions that lead the grinding products into the funnel. From there they are led down to the throat of pr. 60 mm, which can be connected to the exhaust. The saw is equipped with lighting of the saw work area and equipped with a warning light to signal the running of the knife. Pneumatic tensioning of the knife to achieve perfect tension in relation to the expansion of materials during cutting. At the back of the saw is an electrical switchboard with a main switch. The space of the saw blade is covered by opening covers with a safety interlock. In the case of cutting dusty materials with a toothed knife, the space under the table where the knife enters the saw frame is also shaped into a funnel and fitted with a neck pr. 60 mm for the possibility of connection to an external hood. The saw is firmly anchored to the concrete base and leveled on steel pads.The table tops and the sliding guide are made of aluminum profiles covered with AL sheet. Along the indoor table
the plates are rolled on the hardened guide rail. The drive of the guide rail is motorized, according to the values set to
touch screen. Possibility of stepping using a separate button outside the display. A glued gauge on the worktop is used to check the setting of the guide to the required distance from the knife. The two guide rails are separately anchored to the floor. The running surfaces are covered with a hardened foil. The table is moved by four ball bearings with side guide bearings. The table travel is equipped with a friction brake, which allows the table to be locked in any position. The basic table feed is manual. The operating area is protected by a transparent polycarbonate cover. The shield holder carries a handle for moving the table and a control box. The frame of the machine is provided with an epoxy primer and a top epoxy enamel. Double-sided knife sharpening this adjustment allows you to make cuts back and forth. Therefore, the block will be processed faster.
Complete delivery: |
1 pc saw with wiring |
1 piece divided mobile table with protective shield |
3 pcs runway with supports |
1 pc sliding front |
2 pcs belt knife (supplied by customer) |
1 pc operating and maintenance manual with attachments | |
|
on demand |
|
RB 35 MP - small vertical PUR band saw (for small parts cutting)
| Two-wheel, lightweight band saw with sliding desk especially suitable for cutting smaller parts of polyurethane foam and other. Saw RB 35MP based on the type of small saw to the textile cutting named RB 35 PP. High-precision band saw for small parts. | | Tech. specification: Max. cut the amount of charge: 190 mm |
Work table dimensions: 1000 x 1000 mm |
Diameter of the knife: 3100 x 10 x 0.45 mm
El. Total power: 1.1 kW |
Current system: 1 NPE 230 V AC, 50 Hz, T-NS |
Proportions (lxwxh): 1660 x 1030 x 1620 mm |
Weight: 126 kg |
Noise on the job less than 75 db | | Detail: Options: |
Manual feed synchronized square on the right side of the saw to lock the position |
Diameter of wheel 350 mm |
The saw is equipped with a smooth knife |
Retaining strip on the left of the table to achieve a perpendicular cut |
Table made of aluminum profiles covered laminated board |
Precision linear guides |
Other options: |
Infinitely variable blade speed by frequency converter |
Digital display for square distance measuring | (absolute / incremental scale , zero initial value measurement) |
|
on demand |
|
RB-V 600 - vertical band saw without sliding desk
| Basic model of RB 600 series. Triple wheel vertical band saw with stable desk. | | Tech. specification: Input tension: AC 230 V, 50 Hz |
Control tension: DC 24 V |
Noise level: < 75dB |
Desk: without sliding | | | Detail: This saw is basic model of RB 600 series. Fit for flexibile foam or soft foam cutting. |
|
on demand |
|
RB-VP 600 - vertical band saw with sliding desk
| Triple wheel vertical band saw for soft foam cutting. | | Tech. specification: Input tension: AC 230 V, 50 Hz |
Input power: 1.7 kW |
Control tension: DC 24 V |
Noise level: < 75dB |
Desk: manual movement with alowance T-square |
Cutting speed: adjustable with Frequency modulation | | | Detail: This saw is ideal for flexibile foam or soft foam cutting. |
|
on demand |
|
RB-VP 1100 - vertical band saw with sliding desk and two squares (luxury)
| Four wheels vertical band saw with full equipment. Suitable for boards cutting and forming. The maximum cutting height to 1100 mm, distance from the square to blade 1150 mm and length of sliding desk (cut length) to 2200 mm. It is the most ideal solution. | | Tech. specification: El. power: 3.5 kW |
Current system: TN-S 3 NPE |
Supply voltage, frequency: AC 400V, 50Hz |
Max. cutting height: 1100 mm |
Max. square distance from the blade: 1150 mm |
Travel distance (cut length): 2200 mm |
Width of the desk to the left of blade: 1500 mm |
Height of sliding square 1000 + 800 mm |
Dimensions (l x w x h): 5450 x 4150 x 2950 mm |
Height with extended guide: 3900 mm |
Weight: 970 kg | | Detail: Options: |
Electric motor with brake for blade drive, the brake is activated in the event of an emergency stop |
Infinitely variable blade speed by frequency converter |
Motorical knives grinding very good sharpness |
Double-sided sharpening knives high productivity machines |
Optical symmetry control system |
Digital measuring square ( absolute / incremental measure, zero initial value measurement) |
The second square on the left side of the desk
Other on request : |
Motorical square with step by the specified value |
(suitable for cutting boards on both sides cut with a knife) |
Cushion for easy handling and turning blocks |
|
on demand |
|
RB-VP 1300 - vertical band saw for PUR
| Massive four-wheels band saw with variable cutting height up to 1300 mm suitable for formatting and common cutting PUR. From economic to luxury version, according to customer's request. | | Tech. specification: Maximal cutting height: 1300 mm |
Work table dimensions (l x w): 2750 x 3040 mm |
Knife type: 15 x 8100 mm (No.: 02001051/8) |
Size of stones: the tympanic dia. 80/20, p.40 mm |
El. power: 3.5 kW |
Current system: TN-S 3 NPE |
Supply voltage, frequency: AC 400V, 50Hz |
Proportions (l x w x h): 5200 x 3850 x 3000 mm |
Height with extended guide: 4330 mm |
Weight: 720 kg | | Detail: Options: |
Electric motor with brake for blade drive, the brake is activated in the event of an emergency stop |
Infinitely variable blade speed by frequency converter |
Motor driven height adjustment column, scrolling in an exact straight lines |
Motor grinding knives very good sharpness |
Digital display T-square distance from the knife | (absolute / incremental scale, zero initial value measurement) |
|
on demand |
|
PRS 4 - repassed, modification vertical band saw
| PRS 4 modification for cutting froth, foam material in vertical, upright plains. | | Tech. specification: max. layer cut 400 - 1100 mm |
clearness from shoulders to knives 1100 mm |
work-table according to setting, fulfilment Al, foreground steel |
altitude desks 800 - 900 mm | | | Detail: Various possibilities fulfilment, with travelling table, adjustment for formative core, cutwork, with forehead, sliding forehead, motory table motion, forehead, with adjustment for cutting role and other... |
|
on demand |
|
RB-HP SPEC. - special horizontal band saw with vertical sliding
| Special horizontal two wheel cutting machine (band saw) with vertical sliding. This sliding is fit for setting the cutting off height. Saw RB - HP can be fitted with serrated knife, normal knife, convex and concave knife etc. | | Tech. specification: El. power: 1.55 kW (2.5 kW) |
Current system: 3 NPE TN-S |
Supply voltage, frequency: AC 400 V, 50 Hz |
Noise at the workplace: less than 75 db |
Dimensions (l x w x h): 2200 x 1400 x 1750 mm |
Machine weight: 380 kg | | | Detail: This saw is good basis. Can be produced in many designs. With fixed desk, without desk, adjustable or slidin desk etc. |
|
on demand |
|
RB–HX 300 - horizontal manually movable bandsaw for PUR
| This special bandsaw allows for the sawing of the above-mentioned materials into various layer thicknesses. The slabs with max. proportions 2100 x 1200 x 300 mm are put onto a stable table with manual lifting. Shift into the cut are manually too. Good saw for recycled foam cut with a serrated knife. | | Tech. specification: Type: RB–HX 300 |
Specification: horizontal bandsaw
Power supply: AC 400 V, 50 Hz
Max. sawing height (mm): 300 mm |
Max. working height (mm): 300 mm |
Max. working width: 1200 mm |
Table length: 2100 mm
Producer: ROBEX DK, s.r.o. | CZECH REPUBLIC | | Detail: El. motor unit for precision and power cutting. Stable, fixed table with manual height adjustment. Possibility use toothed (serrated ) knife for bonding (recycled) foam cutting.This bandsaw is good for material proportions to 2100 x 1200 x 300 mm. |
|
on demand |
|
RB-HX 1100 - horizontal bandsaw for PUR
| This machine is fit for saw into thin sheets blocks and slabs (from 0 to 1100 mm thick) made from the soft foam materials. The slabs with max. proportions 2100 x 1100 x 1100 mm are put onto a stable table with hydraulic lifting. Shift into the cut are manually by the linear guide. Good saw for recycled foam cut with a serrated knife. | | Tech. specification: Type: RB–HX 1100 |
Specification: horizontal bandsaw with hydraulic agregat
Power supply: AC 400 V, 50 Hz
Max. sawing height (mm): 1100 mm |
Max. working height (mm): 1100 mm |
Max. working width: 1100 mm |
Table length: 2100 mm
Producer: ROBEX DK, s.r.o. | CZECH REPUBLIC | | Detail: Hand shift saw (linear quide), precision hydraulic table lift for thickness settings. Possibility using toothed knives for cutting bonding (recycled) foam. Motor unit for ideal saw. |
|
on demand |
|
RB-VP 600/G - special vertical band saw for graphite blocks cutting
| Specially, custom maded band saw for exact cutting from graphite blocks. | | Tech. specification: Input tension: AC 230 V, 50 Hz |
Input power: 1.7 kW |
Control tension: DC 24 V |
Noise level: < 75dB |
Desk: manual movement with alowance T-square |
Cutting speed: adjustable with Frequency modulation | | | Detail: This saw coming from type RBV 600 destined for cutting flexibile foam or soft foam. |
|
on demand |
|
Servis and repass all type of band saw
| Servis and repass all types cutting machine and band saw. | | Tech. specification: CE - declaration about deuces | | Detail: Exchange bearing, storage wheels, driving engine, repasujeme driving-wheel, manufacture wheels new, manufacture special whetting mechanism and other... |
|
on demand |
|
Production new, repass magged wheels for polyurethane and other soft foam saw.
| Production new, repass magged tang wheels to the belt drunk, band saw. | | Tech. specification: | | Detail: Pursue to the of all type belt drunk. New technology from sturdy material till they in common use India-rubber. |
|
on demand |
|
BR 15 and BR 16 - angular band saw for PUR
| Max.cutting height 500 mm, clearness 350 mm, serves angular, formative dividing froth, foam material.
Angular band saws types BR15 and BR16 are fit for angular, profile cutting. BR15 and BR16 are fit for low volume weight foam. Tyto modely již nenabízíme. | | Tech. specification: Input: 3 N PE 230/400 V, 50 Hz
For BR15: |
max. cutting height: 500 mm |
max. width: 350 mm |
desk proportions: 2200 x 750 mm
For BR16: |
max. cutting height: 300 mm |
max. width: 350 mm |
desk proportions: 2200 x 750 mm |
| | Detail: Saw is fit for cutting foam materials with angle 15 to 90 in longitude to 2200 mm, also to formative, profile cutwork. The vertical cutting unit can be swivelled to 15° in one directions. |
|
not available |
|
BR 800, BR 1000, BR 1500 (MP). BR 2000, BR 2100 (MP), BR S1 PUR were replaced by new models RB
| Manual vertical band saws BR 800, BR 1000, auomatic vertical models BR 1500 and horizontal BR 2000 including models 2100 were replaced by new models series named RB. New design, more quality,
lower power consumption and noise. It is new RB series. | | Tech. specification: Service and spare parts for older band saws are of course. | | Detail: We have new band saws for your cutting. New marking: V for vertivcal band saw, H for horizontal. VP is vertical band saw with sliding desk. |
|
not available |
|
