Machines for flexibile foam & other foam |
 |
Grinders, shredders for foam |
|
 |
Grinding machine with hammers RBX MS 75 for foams (out up to 350 kg / h)
| The large mill with a 75 kW main motor is designed especially for grinding soft foam materials such as Molitan®, RE, lazy foam, etc. The grinding machine is equipped with a safe hopper with automatic conveyors, Omron control system with remote management and a sliding mechanism for easier maintenance. High quality crumb suitable for subsequent recycling.
| | Tech. specification: Type: RBX MS 75
Voltage: AC 400V, 50 Hz, TN-S |
Power consumption of conveyors: 2 x 0.18 kW |
Main engine power: 75 kW |
Transport fan power: 7.5 kW |
Total power: 84 kW | |
Mill output: 350 Kg / hour. (by fraction and type of material) |
Crusher base: rectangle with rotor cover running on rail |
Inlet size (max. Height of material at the inlet): 230 mm |
Sieve size according to the customer's wishes (1 piece included) |
Control panel: with CZ / EN touch screen and remote management |
Proportions (l x w x h): 3280 x 3222 x 1749 mm |
Weight: 3520 kg
The mill meets all Czech and EU standards |
More info on e-mail | | Detail: The machine is very suitable for grinding lazy foam and recycled PUR. During the grinding process, the technological regulations of the manufacturer for the processing of PUR foams must be observed. The average equivalent sound pressure level during operation, which is 92 dB, was verified by measurements with the competent authority. The design of the machine does not allow the noise level to be reduced below the permissible limit of 85 dB, so it is the operator's responsibility to use hearing protectors! Description of the machine | The machine as a whole consists of individual parts: belt conveyor, small pressure belt conveyor, mill with a rotor with hammers, exchangeable sieve, the openings of which determine the size of the processed parts, a suction fan for transporting the processed material to the desired place and a conveying pipe. Access to the working chamber while the machine is running is prevented by erecting belt conveyors and securing the protective cover. Access to the working chamber of the machine is prevented by securing the upper sliding protective cover with a safety switch with locking and locking.Machine control | Omron and Lovato elements are used for control. Due to the power of the main motor, automatic star / delta switching is used with evaluation by the current taken. The data is evaluated in a PLC (once per 3.5 mS) and switches the individual electromechanical elements (contactors). The current is also sensed during crushing and slows down / stops the conveyors during material supersaturation. Performance is therefore always optimal. All parameters are adjustable on the touch screen. |
|
on demand |
|
Milling machine, grinder for polystyrene HAMSTER 5 (for foam grinding, milling)
| Special small grinder with input 5.5 kw for grinding, milling harder foam, polyurethane and styrophore foam materials. Unique price with super power. | | Tech. specification: Type: HAMSTER 5 |
Tension: AC 400 V, 50 Hz |
Input: 5.5 kW |
Power: to 80 Kg / hour |
Proportions: 1850 x 1100 x 710 mm |
more info on e-mail | | | Detail: New concept small grinder machine for foam grinding with 3 pc of specially knives. |
|
Eur 3059.3,- net of VAT |
|
Milling machine, grinder for foam and polystyrene HAMSTER 7 (for foam grinding, milling)
| Special small grinder with input 7.5 kw for grinding, milling soft foam, harder foam, polyurethane and styrophore foam materials. Unique price with super power. | | Tech. specification: Type: HAMSTER 7 |
Tension: AC 400 V, 50 Hz |
Input: 7.5 kW |
Power: to 180 Kg / hour |
Proportions: 1850 x 1100 x 710 mm |
more info on e-mail | | | Detail: New concept small grinder machine for foam grinding with 3 pc of specially knives. |
|
Eur 3144.1,- net of VAT |
|
Cyclone with fan incl. accessories HAMSTER ASPIRATOR for horizontal milling machines
| Cyclone with fan is fit for exhaust crushed material from the crushing chamber. Our Aspirator is ideal for use with plastic bags. Cyclone with fan also increases the performance of crushers and mills. Aspirator is designed for direct use with mills Hamster 5 and 7 too. | | Tech. specification: Name: HAMSTER ASPIRATOR |
Potential: AC 230 V, 50 Hz |
Input: 1500 W |
Proportions: 850 x 560 x 1950 mm |
Weight: cca. 47 Kg |
Input flange dia.: 125 mm (corresponding with flange on Hamster 5 or 7) |
Ventilator dia.: 300 mm |
Permeable bag capacity: 150 dm3 | | | Detail: Cyclone with fan (diameter 300 mm) is prepared for direct and quick to use with crushing mills Hamster. Simply attach the exhaust hose with diameter 150 mm at the outlet neck crusher Hamster, Aspirator connected to a standard wall outlet AC 230 V, output aspirator mounted with quick-fit straps applicable bag and run the Aspirator and crusher Hamster. |
|
Eur 678,- net of VAT |
|
Sieves for Hamster
| Special sieve for grinder Hamster. Type of sieve determine output size of crumb (output fraction). | | Tech. specification: Name: sieve HAMSTER |
Material: steel |
Proportions: 250 x 177 x 4 mm |
Weight: aprox. 780 gr. |
Shape of sieve: exact (rounded) for installation in the mill Hamster | | | Detail: Output size of material determine type of sieve. We produce sieves after your reguest, but we offer some sieves as normal products (bottom). |
|
| Types: | | Sieve 10 x 10 mm for Hamster | | Eur 25,- | | Sieve 16 x 16 mm for Hamster | | Eur 24.2,- | | Sieve 20 x 20 mm for Hamster | | Eur 22.9,- | | Sieve 25 x 25 mm for Hamster | | Eur 22.9,- | | Sieve dia. 6 mm for Hamster | | Eur 27.5,- | | Sieve dia. 8 mm for Hamster | | Eur 27.5,- | | Sieve dia. 10 mm for Hamster | | Eur 27.5,- |
|
from Eur 22.9,- net of VAT |
|
Crawler DS 75
| Older scraping machine DS 75 for crushing or scratching of foam materials and textiles was offered as bazaar. After a partial repair, it has already found its new owner. | | Tech. specification: Voltage: AC 400 V, 50 Hz |
Power: 7500 W | | | Detail: A very well-preserved and functional scratching machine uses scratching pins for its operation, which remove material from the input chamber. Thanks to the lower grid, the size of the output fraction can be precisely defined. The condition corresponds to the age (functional parts after overhaul). |
|
not available |
|
Grinder for foam and soft foam DPH - 10S with crossways knives (for foam grinding, milling)
| Grinder build-it-yourself designate specially on grind froth material. Grinder oblique rotary and knives. | | Tech. specification: Tension AC 400V |
Input 11kW |
Power 120Kg /hod. |
more info on e-mail | | | Detail: Drtič pěnových hmot DPH-10 je zařízení určené k rozmělňování pěnových hmot na bázi polyuretanových (PUR) pěn, MOLITANu® a polystyrenu. |
|
| Other accessories: | | Cyclone | | on demand | | Ventilator | | on demand | | Special hose | | on demand | | Filter, fixative shackle | | on demand |
|
not available |
|
