Machines for flexibile foam & other foam |
 |
Splitting, keyseater machine for foam, rubber |
|
 |
Peeling machine - horizontal band saw RB LS-1400
| The single-service peeling machine of our production is a horizontal band saw with a bandage, which is intended for cutting, peeling layers from a block of soft PUR and similar foams up to a bulk density of 250 kg/m3. Cut layer adjustable programmatically from 2 to 250 mm. Scrolls and all settings via touch screen.
| | Tech. specification: Total el. machine power: 16.5 kW |
Current system: TN-S 3 NPE |
Supply voltage: AC 400V, 50Hz
Maximum height of cut charge: 1000 mm |
Work table size (l x w): 1500 x 2600 mm |
Saw blade length: 8605 x 60 x 0.5 mm |
Size of whetstones - bowl: 125 x 63 x 20 mm |
Minimum cut thickness: 2 mm (depending on the type of material) |
Maximum cutting thickness: 250 mm
Max. dimensions with travels (l x w x h): 5450 x 4150 x 2950 mm |
Weight: 4000 kg | | Detail: The machine consists of four separate units. Main travel frame with 2 wheel saws, travel table, safety fencing and last but not least a suction unit together with a steel cyclone.The construction of the saw is designed so that the operator can easily and safely control all elements (starting and stopping the knife drive, grinding). The frame consists of three welded steel structures connected by screws into one compact unit, on which two wheels are placed, ensuring quiet and stable operation of the cutting belt. For safety reasons and for changing the saw blades, the front parts of the frames are fitted with opening covers. The blade tensioning mechanism is located in the lower left part of the saw frame and the blade is tensioned by sliding the lower wheel. Its optimal tension is ensured by an inductive sensor. The saw is equipped with a grinding device that allows symmetrical grinding of the saw blade and guarantees good grinding quality. The grinding mechanism allows different spatial settings, as needed and in case of wear of the grinders. If the grinders wear out, the operator can level the grinders with a diamond leveler. The saw belt drive is an asynchronous electric motor with a brake that drives the right drive wheel.The separately anchored sliding table of the saw is constructed of aluminum profiles. All anchorages allow height adjustment with adjusting screws according to the unevenness of the floor. Direct and even movement of the upper table frame towards the cut is ensured by three guide tracks and travel radial bearings. The upper running surfaces of the tracks are made of steel plates tensioned with a tensioning screw. The table is moved by an electric motor and a chain. The table itself consists of two constructions. Aluteck construction, which has a travel guide and steel construction, which is adapted as a vacuum chamber. The bottom of the steel structure is lined with sheet metal, in which radial fans are installed, which create a vacuum and hold the block firmly on the table. The upper plate of the steel table is made of non-slip sheet metal. The independently anchored sliding table of the saw is constructed of aluminum profiles. All anchorages allow height adjustment with adjusting screws according to the unevenness of the floor.
Direct and even movement of the upper table frame towards the cut is ensured by three guide tracks and travel radial bearings. The upper running surfaces of the tracks are made of steel plates tensioned with a tensioning screw. The table is moved by an electric motor and a chain. The table itself consists of two constructions. Aluteck construction, which has a travel guide and steel construction, which is adapted as a vacuum chamber. The bottom of the steel structure is lined with sheet metal, in which radial fans are installed, which create a vacuum and hold the block firmly on the table. The top plate of the steel table is made of non-slip sheet metal. | |
|
on demand |
|
Splitting machine BR 1200 G
| One operating splitting machine with working breadth 1200 mm, divide by blocks suck 100 mm on narrower blocks namely and multiple. | | Tech. specification: Level entrance and gets off 900 mm |
Proportion knives 85 x 1,2 x 8200 mm |
Input 11 kW |
Overall length inclusive track 5500 mm |
Potential AC 400 V |
Max. width of cut 1200 mm | | | Detail: According to contract it is possible machine to the-equip arrangement for transverse trimming margin pinch back portfolio. |
stepless speed control feed roller |
backward transport block |
constant position knife-edge guarded optical sense organ |
fore rollway, rear cylindrical and clutch track |
electropneumatic grinding knives |
automatic preselection ten cut |
diamond wheel dresser grindstone |
arrangement for juxtaposition block | |
|
on demand |
|
Splitting machine for foam plastics HDP - 1400 (roll-stock-splitter)
| Machine is identified entirely to dividing portfolio froth material plano to the voluminous materiality 150 kg/qm, to the thickness 200 mm in hand running.
| | Tech. specification: Input 4 kW |
Potential AC 230 V |
Top layer cutting 200 mm |
Rate file zone 5 m/sec |
Machine weight 950 Kg |
Protection road junction 20 A |
Max. breadth cut 1200 mm |
Proportion file zone 60 x 1 x 7650 mm | | | Detail: Principles flat dividing is horizontal cut belt knives indoor in wedge-shaped moulding. Frame of machine is creation by two outer reserved case for knife wheels and middle cutter and serving part. Cutting section constitute two drive feed roller, which feed cleavage material on movable knife-edge, salient from wedge-shaped splitting moulding. Position upper and lower feed roller is setting movement couple endless screw, crestfallen common drive taper wheels. |
|
on demand |
|
Splitting convoluter machine for foam ( roll splitter, roll-stock-splitter)
| Machine is identified entirely to dividing portfolio froth material plano to the voluminous materiality 50 kg/qm, to the thickness 100 mm in hand running. This machine containes prifiling leader (roll) for convoers cutting.
| | Tech. specification: Input: 9 kW |
Tension: AC 230/400 V |
El. interface machinery: 5x4, 3+PE+N |
Top layer cutting: 100 mm |
Average knife wheels.: 560 mm |
Surface speed knives: 5.45 m/s (50 Hz) |
Surface speed serving: 247 mm/s |
Machine weight: 1350 Kg |
Max. breadth cut: 2200 mm (straight leader) |
Max. breadth cut: 2150 mm (formative leader) |
Proportion file zone: 60 x 1 x 9400 mm (+- 20 mm) |
Noisiness machinery: < 70 db | | | Detail: Principles flat dividing is horizontal cut belt knives indoor in wedge-shaped moulding. Frame of machine is creation by two outer reserved case for knife wheels and middle cutter and serving part. Cutting section constitute two drive feed roller, which feed cleavage material on movable knife-edge, salient from wedge-shaped splitting moulding. Position upper and lower feed roller is setting movement couple endless screw, crestfallen common drive taper wheels. |
|
on demand |
|
Band saw cutting machine SVIT L18100 - bazaar
| Precis horizontal band saw SVIT (bazar)! | | Tech. specification: more info on e-mail | | Detail: Bargain-package belt-saw, on order it is possible to make any kind of design. |
|
|
on demand |
|
Keyseater for foam DRPE 01
| To processing froth portfolio and their accurate classify into lengthwise stripes. | | Tech. specification: Potential AC 400 (3x230) V |
Breadth working block 600 mm |
Altitude material 100 mm |
Max. depth paring 50 mm |
Luminosity hood hose 125 mm |
| | Detail: Groove planer polyethylene is identified entirely to processing froth portfolio and their accurate classify into lengthwise stripes and to paring lengthwise groove for purposes packaging techniques. |
|
on demand |
|
