Other machinery, custom made special machines

The roll splitter is intended for transverse cutting of hard and soft materials when the roll of material is spun using a pressed rolled disc knife. Adjustable shaft speed limitation with material, central nut with mandrels to lock sleeve on shaft, quick face lock, two-handed safety trigger. The roll is cut including the paper tube (can be limited by a screw).

The foil roll divider is intended for transverse cutting of solid materials (when roll rotate) into paspules (discs) of different widths. A large cutting disc is used for cutting, which is guided into the cut by a motor (servo actuator) with a smooth change of speed. Adjustable speed limitation of the knife and rolling rollers, locking and a lesion indicator of the cutting position, controlled by the Siemens system. The automatic extraction of the chips is a matter of course.

Machine for cutting and dividing paper and cardboard tubes up to a diameter of 500 mm with a wall thickness of 35 mm. The cut takes place by rolling the cutting disc along a rotating tube. The cut is made manually by pressing the blade on the cut tube through the lever of the cutting arm. The sockets are threaded on the central mandrel with a clamping disk.

The automatic device is designed for longitudinal cutting of materials during rewinding from a roll of max ø 1150 mm, width 1,600 mm and weight 300 kg into strips (discs) of various widths, intended for further processing. Industrial razor blades are used for cutting, with the possibility of their mutual distribution across the entire width. Adjustable speed limit, side straightening, controlled by PLC with touch. screen and measuring length, rewinding speed up to 2.7 m / s.

Paspulator RBP - NC is designed for transverse paspule cutting. Cutting from rolls of woven and non-woven fabrics or coated textile and similar materials, for further processing. RBP - NC operates in full automatic mode. The actuators are designed using stepper motors with high precision positioning of settings and programs.

The machine is designed for cutting materials when rewinding from a roll of max. 450 mm, width 1 500 mm and weight 280 kg to belts (rolls) of different widths. Equipped with a frequency converter for continuous speed change, pneumatic brake, side straight, controlled by PLC with touch. these and length measuring.

Special machine for cutting material in roles. Cutting mechanism for perfect accuracy. It is good for cut tape or pile sides of role. Paspulator has statical special knife, pneumatical shaft for fast change of role, frequency modulation for speed change, double-hand starting of machine and other funnctons.

Machine on dividing material in role inclusive possibilities kerf margin role. Cheapen variant machinery on dividing textile material self-generating method!