(AUTOMATIZATION COMPONENTS, MEASURES, COUNTERS, ENCODERS)
Electronic counter LUCA T (new type with touch display)
New electronic counter LUCA-T with touch display is destined to count the impulses coming from the non-contact or contact sensors. It can distinguish the direction (attribution, subtraction). Read values are counted in two independent units and you can swich displaying of these on the counter display. One of the unit can be set by program for example as the velocity meter.
The whole device is placed in a plastic box with IP 66 protection. As standard, the counter is equipped with 3 bushings for the input and output cables. The instrument is equipped with a 3.5-inch touch panel, which is used to display both measured and input values and the operator can enter the values (eg desired presets). For counting pulses, the counter is equipped with two counting inputs F1 and F2 connected to the terminal board of the instrument. In addition, +24 V voltage is applied to the terminal board for supplying sensors, inputs for external reset buttons and outputs. The counter can be equipped with two relay outputs.
The function and operation of the counter is determined by its parameters. These can be changed by factory setting and program settings (number of presets, number and parameters of inputs and outputs, resetting method, supply voltage, 4th bushing) or directly by the user, by setting SETUP (one-way or two-way counting) The second output, the switching time of the preselection relay, the most used is presetting by the operator.
In the standard configuration, the LUCA-T is set to three counting units with two 0.4s long presets. , the second whole units.
Power supply connection: 230 V, 50 Hz
Counter power: 4.5 VA
Display & Control: 3.5 inch LCD touch panel
Reset button: external or panel
View measuring range: 0.001 - 99999.99
Adjustable counting constant: 0,001 - 9,999
Maximum input frequency: 2200 Hz at 1: 1 duty cycle (bi-directional reading)
Inputs: 2 counting, 2 resetting
Level L input. UL pulses: 0 V - 1 V
Level H input. pulses UH: 4 V - 24 V
Zeroing voltage: 4 V - 24 V
Proud entry. pulses: min. 4 mA
Proud reset: min 4 mA
Number of readers: 3
Preset 1 output: 1 x changeover contacts
2nd preselection output: 1 x make contact, 110 V ADC, max. 1 A
Output pulse length: adjustable
Counter status retention period: inf. 10 years
Electrical protection: IP 66
Counter dimensions: approx. 66 x 92 x 120 mm
Weight: 440 g
For products that are in stock, it is possible to arrange testing, testing by us (the material will be sent by transport service), or you can order the goods by agreement try directly with us.